Marine Boat Crane

Hydraulic Stiff Boom Marine Crane

Haitai hydraulic stiff boom marine crane is a pedestal-mounted deck crane built around one rigid boom: standard up to 20 t, custom up to 50 t, outreach to 40 m, 360° slewing, CCS/ABS/LR/BV available. Hydraulic cylinders luff it, a slewing drive turns it through a full circle, and a hydraulic winch does the lifting. With no telescopic sections or knuckle joint, the load chart stays easy to read and upkeep stays low.
  • SWL: 0.5ton – 20ton, up to 50ton custom
  • Outreach: 5m — 20m, up to 40m custom
  • Hoisting Height: 5m – 30m
  • Slewing: 360° continuous
Quality Assurance
safe and stable
powerful performance
perfect after-sales service

What Is Hydraulic Stiff Boom Marine Crane?

Haitai hydraulic stiff boom marine crane is a pedestal-mounted deck crane built around one rigid boom. Hydraulic cylinders luff it, a slewing drive turns it through a full circle, and a hydraulic winch does the lifting. With no telescopic sections or knuckle joint, the load chart stays easy to read and upkeep stays low. Standard models cover 0.5 t to 20 t, and heavy-duty cranes up to 50 t are custom-engineered to your deck drawing.

Capacity (SWL)Max OutreachHoist HeightSlewingPower
0.5 – 20 t standard, up to 50 t customUp to 40 m5-30 m360° continuousElectro-hydraulic or diesel-hydraulic

Stiff boom marine crane or fixed boom marine crane is one crane, two names.

Buyers search for this crane under both names, and they mean the same thing. “Stiff” and “fixed” describe the boom length only. The boom cannot extend or fold, but the crane itself is far from static: it luffs up and down, slews around its pedestal, and hoists at every radius on its load chart. Outreach is changed by luffing alone, which gives a simple, predictable working arc.

Get Quote

Structure of A Haitai Stiff Boom Ship Crane

Illustration of a hydraulic stiff boom marine crane labeled welded box-section boom, hoisting winch and wire rope, hydraulic luffing cylinder, 360 degree slewing drive and deck pedestal
Illustration Image of a hydraulic stiff boom marine crane: Showing crane arm, luffing cylinder, lifting winch, tower body, control console, platform, slewing mechanism and base unit
  • Boom. A single welded box-section boom with a head sheave for the wire rope. There are no sliding wear pads and no articulation pins to inspect.
  • Luffing circuit. Hydraulic cylinders raise and lower the boom, with load-holding valves on the circuit so the boom stays where the operator leaves it.
  • Slewing drive. A slewing bearing turned by a hydraulic motor and gearbox, giving continuous 360° rotation without stops.
  • Hoisting winch. A hydraulic winch with a brake, wire rope and hook block. Single-fall or multi-fall reeving is chosen to match the rated load.
  • Pedestal. A welded column with a mounting flange for bolting or welding to the deck. We issue vertical load, horizontal shear and overturning moment figures for your naval architect.
  • Protection. Marine paint system to C5-M, IP-rated electrical enclosures, and limit switches. A load moment indicator is available as an option.

Main parts shown in the drawing: base unit, slewing mechanism, tower body, platform with control console, lifting winch, luffing cylinder, crane arm with angle indicator, guide pulley and hook. A dimensioned GA drawing for your vessel is issued after enquiry.

Technical Specification of Marine Stiff Boom Crane for Sale

1. Standard Configuration

ItemSpecification
Slewing360° continuous
HoistingHydraulic winch with brake, wire rope and hook block
Power sourceElectric motor with pump set, or diesel engine power pack
ControlControl console on the crane platform, operator cabin, or wireless radio remote
MountingPedestal with deck flange, bolted or welded
Corrosion protectionMarine paint system to C5-M
ClassificationCCS, ABS, LR, BV available on request

2. Main Parameters by Capacity

Standard Capacities up to 20 Tons | Heavy-Duty Customization up to 50 Tons

  • Standard Range: We offer readily available, standardized configurations for lifting capacities up to 20 tons (200 kN), designed for general deck and cargo handling.
  • Heavy-Duty & Large-Scale: For heavy lifting requirements from 20 tons to 50 tons (500 kN), we provide fully customized engineering tailored specifically to your vessel’s deck arrangement and duty cycle.
SWL (t)Max. radius (m)Min. radius (m)Luffing time (s)Slewing (r/min)Hoist height (m)Motor power (kW)
0.55 – 121.3 – 2.66015-307.5
16 – 121.3 – 2.66015-2511
25 – 151.1 – 3.26015-2515
38 – 181.7 – 3.8700.95-2522
512 – 202.5 – 4.2800.755-2037
812 – 202.5 – 4.21000.755-2055
1012 – 202.5 – 4.21100.755-2075
1512 – 202.5 – 4.21100.65-1590
2016 – 253.2 – 5.31200.65-152 × 75
25 (custom)20 – 303.2 – 6.31300.55-102 × 90
30 (custom)303.2 – 6.31400.45-102 × 90
35 (custom)20 – 354.2 – 7.41500.55-102 × 110
40 (custom)20 – 354.2 – 7.41500.55-102 × 140
45 (custom)25 – 405.3 – 8.51600.455-102 × 140
50 (custom)25 – 405.3 – 8.51700.455-102 × 165

Please Note: Configurations up to 20 tons are built to our proven, standardized designs for faster production and delivery. For heavy-duty operations require lifting capacities up to 50 tons, each crane must be custom-engineered based on your specific vessel parameters, classification society requirements, and deck stability needs. Shaded rows are custom-engineered. Hoisting speed is 15 m/min across the range, and rated load in kN is the SWL in tonnes multiplied by 10. Values are for reference only.

3. Configured by Duty, Not Just Tonnage

Two cranes with the same SWL can be very different machines once the duty cycle and the reach are different. We group typical orders into three bands, then tune each one to the vessel.

Duty bandSWLOutreachTypical use
Light service0.5 – 3 t5 – 18 mStores, hoses, small equipment, platform maintenance
General deck and cargo5 – 15 t12 – 20 mHatch-side cargo, bunkering gear, wharf-side handling
Heavy and long reach20 t standard; up to 50 t custom16 – 40 mOffshore supply, heavy equipment, project cargo

Ranges are indicative. Every crane is designed against your load-at-radius requirement and deck arrangement.

4. Power Pack and Control Options

  • Electro-hydraulic. An electric motor drives the pump set from the vessel’s own supply. This suits ships with spare generator capacity and keeps the crane quiet and clean.
  • Diesel-hydraulic. A diesel engine sits on the crane body and drives the pump directly, so the crane works without relying on ship’s power. This is the layout in the 5 t photo above, and it helps on barges, retrofit jobs and vessels with limited electrical capacity.
  • Operator control. Stand control puts the operator beside the load path. A cabin adds weather protection for long cargo shifts, and a radio remote lets the operator move to the best viewing position.

Where Does the Hydraulic Fixed Boom Crane?

The photos below show the same crane concept at three very different scales: a compact unit tucked among structure, a small unit on a platform edge, and a large unit working beside a quay.

✅️ Offshore Platforms and Fixed Installations

Space around the lift point is often tight and the crane may need to serve one fixed area for years. A compact stiff boom crane with a short radius does that job with very few moving parts to maintain.

Yellow Haitai hydraulic stiff boom marine crane SWL 1 t at 5 m mounted on a platform with an operator beside it
Yellow stiff boom crane SWL 1t-5m, mounted among structural steelwork on a platform level.
Red Haitai hydraulic stiff boom marine crane with boom stowed over tanker pipework
A red stiff boom crane on a tanker deck, boom stowed over the pipework.

✅️ Work Boats and Service Vessels

On smaller vessels, the crane lifts stores, tools and light equipment between deck and quay or between deck and a supply boat. A slim boom and a low pedestal keep the footprint small.

Red Haitai hydraulic stiff boom crane SWL 1 t at 5 m on a blue vessel platform with luffing cylinder
A red 1t-5m unit on a vessel platform. The luffing cylinder runs under the boom.
haitai hydraulic stiff boom marine crane fixed on a vessel deck
Yellow SWL 5 t at 15 m stiff boom marine crane fixed on a vessel deck.

✅️ Cargo Vessels and Wharf-Side Handling

Larger boom sections, heavier pedestals and multi-fall wire rope take over as capacity rises. This is the version used for hatch-side cargo, spare parts and equipment lifts at the berth.

✅️ Tankers and Pipework Decks

On tankers the crane stands among manifold pipework with little free deck. Its rigid boom, short stowage run and simple hydraulics suit lifts of hoses, spare parts and provisions between deck and quay.

Large cream hydraulic stiff boom marine crane on a vessel at a wharf with wire rope falls hanging from the boom head
A larger crane with a tapered boom and wide pedestal, working alongside a quay.
Two Haitai hydraulic stiff boom marine cranes, one white and one red, working on a tanker deck at a terminal
White and red stiff boom cranes working on a tanker deck.

Why Is Haitai’s Stiff Boom Marine Crane the Right Choice?

Built and Checked at Our Henan Factory

Haitai Crane is a professional marine crane manufacturer in Fengqiu, Henan Province, China. We build every marine deck crane at our Henan factories, from boom fabrication and pedestal machining through to hydraulic assembly and painting. Before shipment we run function checks on luffing, slewing and hoisting, and we carry out a load test when the class society or the buyer requires one. Test documents go with the crane.

Class Certification

Haitai marine boat cranes can be delivered with CCS, ABS, LR and BV certification. Please name the class society in your first enquiry so we can prepare the design approval package, material certificates and welding procedures in the right format from the start.

Hiatai Marine Cranes Fit Your Need

  • Haitai’s Stiff Boom Marine Cranes fit when the deck has room to rest the boom, the lifts are repeated, and the owner wants the fewest parts to look after.
  • Look at another type when stowed height is limited by a bridge or canal, or when the hook must reach under a structure. A knuckle boom or knuckle-telescopic crane suits those cases better.
Black Haitai hydraulic stiff boom crane SWL 1 t at 5.5 m fixed on a base platform in an outdoor factory
Black hydraulic fixed boom crane SWL 1-t5.5m, fixed on a base in an outdoor factory.
Grey-green Haitai hydraulic stiff boom crane SWL 5 t with boom extended in the factory yard
A 5 t crane in our factory yard with the boom out at low angle, ahead of delivery.

For a side-by-side view of all configurations, read our guide to the 7 types of marine cranes. If you are not sure which one fits, send us the deck plan and we will recommend one.

Request a General Arrangement Drawing

Fill in what you know and send it back. Even partial answers are enough for our engineers to start a dimensioned GA drawing, load chart and foundation reaction table.

#Item to confirmYour requirement
1SWL and the radius it must be lifted at 
2Minimum and maximum working radius 
3Hook height above and below the crane base 
4Hoisting, luffing and slewing speed expectations 
5Vessel type, size and crane position on deck 
6Pedestal height and deck plate thickness at the foundation 
7Boom rest position and free deck length for stowing 
8Power source (ship supply voltage / frequency, or diesel power pack) 
9Control type (stand, cabin or radio remote) 
10Lifting attachment (hook, grab, rescue basket, other) 
11Sea state, wind limit, ambient temperature and coating class 
12Class society and inspection requirements 
13Newbuild or retrofit, and target delivery date 

Whether you need a standard, cost-effective marine crane up to 20 tons or a heavily reinforced, customized offshore workhorse up to 50 tons, Haitai’s engineering team has you covered.

👉 Request a Custom GA Drawing & Quote Today.

Get Quote

Leon
10+ Years Exp.
5,000+ Customers
50+ Countries

Simon

Crane Solutions Specialist  ·  HT Crane

Specialized in Gantry Crane, Port Crane, Container Crane , Marine Boat Crane & Overhead Crane export solutions. 10+ years helping global clients with pre-sales consultation, capacity selection and site-specific configurations.

Honor & Certificates

Service

Pre-Sales Technical Consultation
Our engineering team reviews your yard layout, throughput requirements, and infrastructure before recommending a configuration. We provide technical proposals, layout drawings, and load calculations — at no cost — before you commit to a purchase.
Factory Acceptance Testing (FAT)
All cranes undergo full load testing at our factory before shipment. Buyers are welcome to witness FAT in person or via live video. Test reports and certificates are issued upon completion.
Installation & Commissioning
Our on-site service team handles full crane erection, electrical commissioning, and system integration at your facility. Commissioning includes operator training and handover documentation.
Spare Parts Supply
We maintain a global spare parts inventory for all crane models we supply. Critical components — spreaders, hoist motors, VFD drives, PLC modules — are available for dispatch within 48–72 hours. Long-term supply agreements are available for fleet operators.
Preventive Maintenance Programs
We offer annual maintenance contracts covering inspections, lubrication, wear part replacement, and safety audits. Remote diagnostics via our crane monitoring platform allows early identification of faults before they cause unplanned downtime.
Warranty
Standard warranty: 24 months from commissioning date covering structural, mechanical, and electrical components under normal operating conditions. Extended warranty and service contracts available.

Why Choose Us

Powerful Strength
Our products are factory direct sales with guaranteed quality. They sell well all over the country and have received good feedback from customers multiple times!
Experienced
Our products are factory direct sales with guaranteed quality. They sell well all over the country and have received good feedback from customers multiple times!
Quality Assurance
Our products are factory direct sales with guaranteed quality. They sell well all over the country and have received good feedback from customers multiple times!
Worry Free Service
Our products are factory direct sales with guaranteed quality. They sell well all over the country and have received good feedback from customers multiple times!

Frequently Asked Questions

For any unanswered questions, reach out to our support team via email. We'll respond as soon as possible to assist you.
Q1: Is a hydraulic fixed boom crane the same as a hydraulic stiff boom crane?
Yes. Both names describe a boom of fixed length that does not telescope or fold. The crane still luffs, slews and hoists, so “fixed” refers to the boom structure and not to the crane’s movement.
Q2: How is the working radius changed if the boom cannot extend?
By luffing. The hydraulic cylinders raise or lower the boom, which brings the hook closer or moves it farther out. Rated capacity at each angle is shown on the load chart supplied with the crane.
Q3: Can the crane operate without power from the ship?
Yes. A diesel-hydraulic power pack mounted on the crane body runs the pumps independently, which suits barges, retrofits and vessels with limited generator capacity.
Q4: What do you need from me to prepare a quotation?
The SWL at maximum radius, the radius range, the hook height, the vessel type and crane position, the power supply, and the required class society. A deck plan or photo of the installation area helps us check boom rest and foundation.
Q5: Can the crane be certified by CCS, ABS, LR or BV?
Yes. We can deliver the crane with CCS, ABS, LR or BV certification. Tell us which society applies at enquiry stage so the approval documents are prepared on the right schedule.

Message

Feel Free to Contact Us

Contact Form
Please specify your requirement by referring to the following aspects:
  • Which crane product do you need?
  • What is the maximum lifting capacity (in tons) required for your project?
  • Could you specify the lifting height (in meters) needed?
  • Can you provide details on the working environment, such as ground conditions, space limitations, and any obstacles?
  • What is the expected frequency of use and the duration of the project?

related products

Marine Arm Crane-5
Marine Arm Crane – Knuckle Boom and Articulated Cranes for Commercial Vessels

A marine arm crane is one of the most versatile pieces of deck equipment a vessel can carry. Unlike a straight-boom deck crane, a knuckle boom or articulated arm crane folds compactly when not in use, reaches over obstacles, and positions loads with precision that a fixed boom simply cannot match. For ship owners and procurement teams evaluating deck crane options, the choice between a straight boom and an articulated arm crane often comes down to one question: does your operation require the crane to work in confined spaces, reach below deck level, or handle irregular load positions? If yes, a marine arm crane is almost certainly the right choice. This page covers what marine arm cranes are, where they are used, what the key specifications mean, and how to evaluate suppliers before committing to a purchase. What Is a Marine Arm Crane? The Core Design Concept A marine arm crane — also called a knuckle boom crane or articulated marine crane — uses two or more boom sections connected by hydraulic-powered knuckle joints. This articulation allows the crane to…

Read More
Ship Deck Crane
Ship Deck Crane – Marine Cargo Cranes for Commercial and Offshore Vessels

Selecting the wrong ship deck crane creates problems that follow you for the vessel’s entire operational life. Inadequate lift capacity, poor outreach, or a crane not certified by your classification society — any of these can delay port clearance, increase operating cost, or create liability exposure in the event of an incident. This page gives procurement managers, ship owners, and shipyard purchasing teams a clear, practical overview of what to look for when sourcing a ship deck crane. We cover equipment types, key technical parameters, certification requirements, and what distinguishes a reliable supplier from a risky one. HT crane manufacture and export ship deck cranes across a full capacity range — and we back every unit with classification society certification, factory load testing, and long-term spare parts support. What Is a Ship Deck Crane? The Basic Function A ship deck crane is a rotating lifting device permanently mounted on a vessel’s deck. It handles cargo loading and unloading at ports where shore-based equipment is unavailable or insufficient. It also supports deck operations, equipment transfers, and maintenance lifts during voyage. Vessel…

Read More
boat jib crane application
Boat Jib Crane

A boat jib crane is a marine-grade lifting solution designed specifically for docks, marinas, shipyards, and offshore platforms — where saltwater corrosion, confined space, and dynamic loads demand equipment built to a different standard. HaiTai Crane’s boat jib cranes deliver 0.5 to 20 tons lifting capacity, 180° to 360° rotation, and full C4–C5 marine corrosion protection from structural steel to electrical enclosures. Quick Reference: Boat Jib Crane Specifications Parameter Standard Range Custom Available Lifting Capacity 0.5 t – 20 t Up to 50 t on request Jib (Boom) Length 3 m – 10 m Up to 15 m Rotation Angle 180° / 270° / 360° Configurable Lifting Height 3 m – 12 m Customizable Hoist Type Electric chain / Wire rope Manual available Control Mode Push-button / Radio remote Cabin option Corrosion Protection Hot-dip galvanized + marine paint C4/C5 ISO 12944 Mounting Type Column / Wall / Dock-embedded Floating dock option Certification CE, ISO 9001:2015 CCS / BV on request Power Supply 380V / 50Hz (customizable) Global voltage supported What Is a Boat Jib Crane Structure and Operating Principle A…

Read More
Top