Морской судоподъемник

Hydraulic Stiff Boom Marine Crane

Haitai hydraulic stiff boom marine crane is a pedestal-mounted deck crane built around one rigid boom: standard up to 20 t, custom up to 50 t, outreach to 40 m, 360° slewing, CCS/ABS/LR/BV available. Hydraulic cylinders luff it, a slewing drive turns it through a full circle, and a hydraulic winch does the lifting. With no telescopic sections or knuckle joint, the load chart stays easy to read and upkeep stays low.
  • SWL: 0.5ton – 20ton, up to 50ton custom
  • Outreach: 5m — 20m, up to 40m custom
  • Hoisting Height: 5m – 30m
  • Slewing: 360° continuous
Гарантия качества
безопасный и стабильный
мощное исполнение
безупречное послепродажное обслуживание

What Is Hydraulic Stiff Boom Marine Crane?

Haitai hydraulic stiff boom marine crane is a pedestal-mounted deck crane built around one rigid boom. Hydraulic cylinders luff it, a slewing drive turns it through a full circle, and a hydraulic winch does the lifting. With no telescopic sections or knuckle joint, the load chart stays easy to read and upkeep stays low. Standard models cover 0.5 t to 20 t, and heavy-duty cranes up to 50 t are custom-engineered to your deck drawing.

Capacity (SWL)Макс АутриджHoist HeightУбийствоВласть
0.5 – 20 t standard, up to 50 t customUp to 40 m5-30 m360° непрерывныйElectro-hydraulic or diesel-hydraulic

Stiff boom marine crane or fixed boom marine crane is one crane, two names.

Buyers search for this crane under both names, and they mean the same thing. “Stiff” and “fixed” describe the boom length only. The boom cannot extend or fold, but the crane itself is far from static: it luffs up and down, slews around its pedestal, and hoists at every radius on its load chart. Outreach is changed by luffing alone, which gives a simple, predictable working arc.

Получить предложение

Structure of A Haitai Stiff Boom Ship Crane

Illustration of a hydraulic stiff boom marine crane labeled welded box-section boom, hoisting winch and wire rope, hydraulic luffing cylinder, 360 degree slewing drive and deck pedestal
Illustration Image of a hydraulic stiff boom marine crane: Showing crane arm, luffing cylinder, lifting winch, tower body, control console, platform, slewing mechanism and base unit
  • Boom. A single welded box-section boom with a head sheave for the wire rope. There are no sliding wear pads and no articulation pins to inspect.
  • Luffing circuit. Hydraulic cylinders raise and lower the boom, with load-holding valves on the circuit so the boom stays where the operator leaves it.
  • Slewing drive. A slewing bearing turned by a hydraulic motor and gearbox, giving continuous 360° rotation without stops.
  • Hoisting winch. A hydraulic winch with a brake, wire rope and hook block. Single-fall or multi-fall reeving is chosen to match the rated load.
  • Pedestal. A welded column with a mounting flange for bolting or welding to the deck. We issue vertical load, horizontal shear and overturning moment figures for your naval architect.
  • Protection. Marine paint system to C5-M, IP-rated electrical enclosures, and limit switches. A load moment indicator is available as an option.

Main parts shown in the drawing: base unit, slewing mechanism, tower body, platform with control console, lifting winch, luffing cylinder, crane arm with angle indicator, guide pulley and hook. A dimensioned GA drawing for your vessel is issued after enquiry.

Technical Specification of Marine Stiff Boom Crane for Sale

1. Standard Configuration

ЭлементСпецификация
Убийство360° непрерывный
ПодъемHydraulic winch with brake, wire rope and hook block
источник питанияElectric motor with pump set, or diesel engine power pack
КонтрольControl console on the crane platform, operator cabin, or wireless radio remote
MountingPedestal with deck flange, bolted or welded
Защита от коррозииMarine paint system to C5-M
КлассификацияCCS, ABS, LR, BV available on request

2. Main Parameters by Capacity

Standard Capacities up to 20 Tons | Heavy-Duty Customization up to 50 Tons

  • Standard Range: We offer readily available, standardized configurations for lifting capacities up to 20 tons (200 kN), designed for general deck and cargo handling.
  • Heavy-Duty & Large-Scale: For heavy lifting requirements from 20 tons to 50 tons (500 kN), we provide fully customized engineering tailored specifically to your vessel’s deck arrangement and duty cycle.
SWL (t)Max. radius (m)Min. radius (m)Luffing time (s)Slewing (r/min)Hoist height (m)Motor power (kW)
0.55 – 121.3 – 2.66015-307.5
16 – 121.3 – 2.66015-2511
25 – 151.1 – 3.26015-2515
38 – 181.7 – 3.8700.95-2522
512 – 202.5 – 4.2800.755-2037
812 – 202.5 – 4.21000.755-2055
1012 – 202.5 – 4.21100.755-2075
1512 – 202.5 – 4.21100.65-1590
2016 – 253.2 – 5.31200.65-152 × 75
25 (custom)20 – 303.2 – 6.31300.55-102 × 90
30 (custom)303.2 – 6.31400.45-102 × 90
35 (custom)20 – 354.2 – 7.41500.55-102 × 110
40 (custom)20 – 354.2 – 7.41500.55-102 × 140
45 (custom)25 – 405.3 – 8.51600.455-102 × 140
50 (custom)25 – 405.3 – 8.51700.455-102 × 165

Please Note: Configurations up to 20 tons are built to our proven, standardized designs for faster production and delivery. For heavy-duty operations require lifting capacities up to 50 tons, each crane must be custom-engineered based on your specific vessel parameters, classification society requirements, and deck stability needs. Shaded rows are custom-engineered. Hoisting speed is 15 m/min across the range, and rated load in kN is the SWL in tonnes multiplied by 10. Values are for reference only.

3. Configured by Duty, Not Just Tonnage

Two cranes with the same SWL can be very different machines once the duty cycle and the reach are different. We group typical orders into three bands, then tune each one to the vessel.

Duty bandSWLИнформационно-просветительская работаTypical use
Light service0.5 – 3 t5 – 18 mStores, hoses, small equipment, platform maintenance
General deck and cargo5 – 15 t12 – 20 mHatch-side cargo, bunkering gear, wharf-side handling
Heavy and long reach20 t standard; up to 50 t custom16 – 40 mOffshore supply, heavy equipment, project cargo

Ranges are indicative. Every crane is designed against your load-at-radius requirement and deck arrangement.

4. Power Pack and Control Options

  • Electro-hydraulic. An electric motor drives the pump set from the vessel’s own supply. This suits ships with spare generator capacity and keeps the crane quiet and clean.
  • Diesel-hydraulic. A diesel engine sits on the crane body and drives the pump directly, so the crane works without relying on ship’s power. This is the layout in the 5 t photo above, and it helps on barges, retrofit jobs and vessels with limited electrical capacity.
  • Operator control. Stand control puts the operator beside the load path. A cabin adds weather protection for long cargo shifts, and a radio remote lets the operator move to the best viewing position.

Where Does the Hydraulic Fixed Boom Crane?

The photos below show the same crane concept at three very different scales: a compact unit tucked among structure, a small unit on a platform edge, and a large unit working beside a quay.

✅️ Offshore Platforms and Fixed Installations

Space around the lift point is often tight and the crane may need to serve one fixed area for years. A compact stiff boom crane with a short radius does that job with very few moving parts to maintain.

Yellow Haitai hydraulic stiff boom marine crane SWL 1 t at 5 m mounted on a platform with an operator beside it
Yellow stiff boom crane SWL 1t-5m, mounted among structural steelwork on a platform level.
Red Haitai hydraulic stiff boom marine crane with boom stowed over tanker pipework
A red stiff boom crane on a tanker deck, boom stowed over the pipework.

✅️ Work Boats and Service Vessels

On smaller vessels, the crane lifts stores, tools and light equipment between deck and quay or between deck and a supply boat. A slim boom and a low pedestal keep the footprint small.

Red Haitai hydraulic stiff boom crane SWL 1 t at 5 m on a blue vessel platform with luffing cylinder
A red 1t-5m unit on a vessel platform. The luffing cylinder runs under the boom.
haitai hydraulic stiff boom marine crane fixed on a vessel deck
Yellow SWL 5 t at 15 m stiff boom marine crane fixed on a vessel deck.

✅️ Cargo Vessels and Wharf-Side Handling

Larger boom sections, heavier pedestals and multi-fall wire rope take over as capacity rises. This is the version used for hatch-side cargo, spare parts and equipment lifts at the berth.

✅️ Tankers and Pipework Decks

On tankers the crane stands among manifold pipework with little free deck. Its rigid boom, short stowage run and simple hydraulics suit lifts of hoses, spare parts and provisions between deck and quay.

Large cream hydraulic stiff boom marine crane on a vessel at a wharf with wire rope falls hanging from the boom head
A larger crane with a tapered boom and wide pedestal, working alongside a quay.
Two Haitai hydraulic stiff boom marine cranes, one white and one red, working on a tanker deck at a terminal
White and red stiff boom cranes working on a tanker deck.

Why Is Haitai’s Stiff Boom Marine Crane the Right Choice?

Built and Checked at Our Henan Factory

Haitai Crane is a professional marine crane manufacturer in Fengqiu, Henan Province, China. We build every marine deck crane at our Henan factories, from boom fabrication and pedestal machining through to hydraulic assembly and painting. Before shipment we run function checks on luffing, slewing and hoisting, and we carry out a load test when the class society or the buyer requires one. Test documents go with the crane.

Class Certification

Хайтай морские судоподъемники can be delivered with CCS, ABS, LR and BV certification. Please name the class society in your first enquiry so we can prepare the design approval package, material certificates and welding procedures in the right format from the start.

Hiatai Marine Cranes Fit Your Need

  • Haitai’s Stiff Boom Marine Cranes fit when the deck has room to rest the boom, the lifts are repeated, and the owner wants the fewest parts to look after.
  • Look at another type when stowed height is limited by a bridge or canal, or when the hook must reach under a structure. A knuckle boom or knuckle-telescopic crane suits those cases better.
Black Haitai hydraulic stiff boom crane SWL 1 t at 5.5 m fixed on a base platform in an outdoor factory
Black hydraulic fixed boom crane SWL 1-t5.5m, fixed on a base in an outdoor factory.
Grey-green Haitai hydraulic stiff boom crane SWL 5 t with boom extended in the factory yard
A 5 t crane in our factory yard with the boom out at low angle, ahead of delivery.

For a side-by-side view of all configurations, read our guide to the 7 types of marine cranes. If you are not sure which one fits, send us the deck plan and we will recommend one.

Request a General Arrangement Drawing

Fill in what you know and send it back. Even partial answers are enough for our engineers to start a dimensioned GA drawing, load chart and foundation reaction table.

#Item to confirmYour requirement
1SWL and the radius it must be lifted at 
2Minimum and maximum working radius 
3Hook height above and below the crane base 
4Hoisting, luffing and slewing speed expectations 
5Vessel type, size and crane position on deck 
6Pedestal height and deck plate thickness at the foundation 
7Boom rest position and free deck length for stowing 
8Power source (ship supply voltage / frequency, or diesel power pack) 
9Control type (stand, cabin or radio remote) 
10Lifting attachment (hook, grab, rescue basket, other) 
11Sea state, wind limit, ambient temperature and coating class 
12Class society and inspection requirements 
13Newbuild or retrofit, and target delivery date 

Whether you need a standard, cost-effective marine crane up to 20 tons or a heavily reinforced, customized offshore workhorse up to 50 tons, Haitai’s engineering team has you covered.

👉 Request a Custom GA Drawing & Quote Today.

Получить предложение

Leon
10+ Опыт работы в годах.
5,000+ Клиенты
50+ Страны

Саймон

Специалист по крановым решениям · HT Crane

Специализируемся на экспортных решениях в области козловых кранов, портовых кранов, контейнерных кранов, морских судоподъемников и мостовых кранов. Более 10 лет помогаем глобальным клиентам с предпродажными консультациями, подбором грузоподъемности и конфигурацией оборудования с учетом специфики объекта.

Награды и сертификаты

Услуга

Предпродажная техническая консультация
Перед тем как рекомендовать конфигурацию, наша инженерная команда анализирует планировку вашей площадки, требования к пропускной способности и инфраструктуру. Мы бесплатно предоставляем технические предложения, чертежи планировки и расчеты нагрузок, прежде чем вы примете решение о покупке.
Заводские приемочные испытания (FAT)
Все краны проходят испытания под полной нагрузкой на нашем заводе перед отгрузкой. Покупатели могут лично присутствовать на заводских испытаниях или наблюдать за ними в режиме видеосвязи. Протоколы испытаний и сертификаты выдаются по завершении работ.
Монтаж и ввод в эксплуатацию
Наша выездная сервисная бригада выполняет полный монтаж крана, электромонтажные работы и интеграцию систем на вашем предприятии. Ввод в эксплуатацию включает обучение операторов и оформление документации по передаче объекта.
Поставка запасных частей
Мы поддерживаем глобальный склад запасных частей для всех поставляемых нами моделей кранов. Критические компоненты — траверсы, двигатели лебедок, частотно-регулируемые приводы, модули ПЛК — доступны для отправки в течение 48–72 часов. Для операторов автопарков доступны долгосрочные соглашения о поставках.
Программы профилактического обслуживания
Мы предлагаем годовые контракты на техническое обслуживание, включающие осмотры, смазку, замену изнашиваемых деталей и проверки безопасности. Дистанционная диагностика с помощью нашей платформы мониторинга кранов позволяет выявлять неисправности на ранней стадии, прежде чем они приведут к незапланированным простоям.
Гарантия
Стандартная гарантия: 24 месяца с даты ввода в эксплуатацию, распространяется на конструктивные, механические и электрические компоненты при нормальных условиях эксплуатации. Возможна расширенная гарантия и заключение сервисных контрактов.

Почему выбирают нас?

Мощная сила
Наша продукция продается напрямую с завода и гарантирует высокое качество. Она хорошо продается по всей стране и неоднократно получала положительные отзывы от покупателей!
Опытный
Наша продукция продается напрямую с завода и гарантирует высокое качество. Она хорошо продается по всей стране и неоднократно получала положительные отзывы от покупателей!
Гарантия качества
Наша продукция продается напрямую с завода и гарантирует высокое качество. Она хорошо продается по всей стране и неоднократно получала положительные отзывы от покупателей!
Беспроблемное обслуживание
Наша продукция продается напрямую с завода и гарантирует высокое качество. Она хорошо продается по всей стране и неоднократно получала положительные отзывы от покупателей!

Часто задаваемые вопросы

For any unanswered questions, reach out to our support team via email. We'll respond as soon as possible to assist you.
Q1: Is a hydraulic fixed boom crane the same as a hydraulic stiff boom crane?
Yes. Both names describe a boom of fixed length that does not telescope or fold. The crane still luffs, slews and hoists, so “fixed” refers to the boom structure and not to the crane’s movement.
Q2: How is the working radius changed if the boom cannot extend?
By luffing. The hydraulic cylinders raise or lower the boom, which brings the hook closer or moves it farther out. Rated capacity at each angle is shown on the load chart supplied with the crane.
Q3: Can the crane operate without power from the ship?
Yes. A diesel-hydraulic power pack mounted on the crane body runs the pumps independently, which suits barges, retrofits and vessels with limited generator capacity.
Q4: What do you need from me to prepare a quotation?
The SWL at maximum radius, the radius range, the hook height, the vessel type and crane position, the power supply, and the required class society. A deck plan or photo of the installation area helps us check boom rest and foundation.
Q5: Can the crane be certified by CCS, ABS, LR or BV?
Yes. We can deliver the crane with CCS, ABS, LR or BV certification. Tell us which society applies at enquiry stage so the approval documents are prepared on the right schedule.

Сообщение

Не стесняйтесь обращаться к нам.

Форма обратной связи
Пожалуйста, уточните ваши требования, указав следующие аспекты:
  • Какой именно кран вам нужен?
  • Какова максимальная грузоподъемность (в тоннах), необходимая для вашего проекта?
  • Не могли бы вы указать необходимую высоту подъема (в метрах)?
  • Можете ли вы предоставить подробную информацию о рабочей среде, такую как состояние грунта, ограничения по площади и наличие каких-либо препятствий?
  • Какова ожидаемая частота использования и продолжительность проекта?

сопутствующие товары

Marine Arm Crane-5
Морские стреловые краны – шарнирно-сочлененные и шарнирно-сочлененные краны для коммерческих судов.

Морской стреловой кран — одно из самых универсальных палубных устройств, которые может перевозить судно. В отличие от палубного крана с прямой стрелой, кран с шарнирно-сочлененной стрелой компактно складывается, когда не используется, позволяет преодолевать препятствия и точно позиционировать грузы, чего не может обеспечить кран с фиксированной стрелой. Для судовладельцев и закупочных команд, оценивающих варианты палубных кранов, выбор между краном с прямой стрелой и краном с шарнирно-сочлененной стрелой часто сводится к одному вопросу: требуется ли для вашей операции работа крана в ограниченных пространствах, работа ниже уровня палубы или перемещение грузов в нестандартных положениях? Если да, то морской стреловой кран почти наверняка будет правильным выбором. На этой странице рассматривается, что представляют собой морские стреловые краны, где они используются, что означают основные технические характеристики и как оценить поставщиков перед совершением покупки. Что такое морской стреловой кран? Основная концепция конструкции. Морской стреловой кран — также называемый краном с шарнирно-сочлененной стрелой или морским стреловым краном — использует две или более секции стрелы, соединенные гидравлическими шарнирными соединениями. Эта артикуляция позволяет крану…

Читать далее
Ship Deck Crane
Палубный кран для судов – морские грузовые краны для коммерческих и шельфовых судов.

Неправильный выбор палубного крана для судна создает проблемы, которые будут преследовать вас на протяжении всего срока эксплуатации судна. Недостаточная грузоподъемность, плохой вылет стрелы или кран, не сертифицированный классификационным обществом, — любая из этих проблем может задержать прохождение таможенного контроля в порту, увеличить эксплуатационные расходы или создать юридическую ответственность в случае инцидента. Эта страница предоставляет менеджерам по закупкам, судовладельцам и командам по закупкам верфей четкий и практический обзор того, на что следует обращать внимание при выборе палубного крана для судна. Мы рассматриваем типы оборудования, ключевые технические параметры, требования к сертификации и то, что отличает надежного поставщика от рискованного. Компания HT Crane производит и экспортирует палубные краны для судов в полном диапазоне грузоподъемности — и мы обеспечиваем каждую единицу оборудования сертификацией классификационного общества, заводскими испытаниями на нагрузку и долгосрочной поддержкой запасными частями. Что такое палубный кран для судна? Основная функция. Палубный кран для судна — это вращающееся подъемное устройство, постоянно установленное на палубе судна. Он используется для погрузки и разгрузки грузов в портах, где береговое оборудование недоступно или недостаточно. Он также поддерживает палубные операции, перемещение оборудования и подъемные работы по техническому обслуживанию во время рейса. Судно…

Читать далее
boat jib crane application
Стаксельный кран

Судовой консольный кран — это подъемное устройство морского класса, разработанное специально для доков, марин, верфей и морских платформ, где коррозия от соленой воды, ограниченное пространство и динамические нагрузки требуют оборудования, изготовленного по иным стандартам. Судовые консольные краны HaiTai Crane обеспечивают грузоподъемность от 0,5 до 20 тонн, вращение от 180° до 360° и полную защиту от морской коррозии класса C4–C5, от конструкционной стали до электрических корпусов. Краткий справочник: Технические характеристики судового поворотного крана Параметры Стандартный диапазон Доступен индивидуальный Грузоподъемность 0,5 т – 20 т До 50 т по запросу Длина стрелы 3 м – 10 м До 15 м Угол поворота 180° / 270° / 360° Настраиваемый Высота подъема 3 м – 12 м Настраиваемая Тип подъемника Электрическая цепь / Тросовая тяга Доступно ручное управление Режим управления Кнопочный / Радиопульт Опция кабины Защита от коррозии Горячее цинкование + морская краска C4/C5 ISO 12944 Тип монтажа Колонна / Стена / Встроенный в причал Опция плавучего причала Сертификация CE, ISO 9001:2015 CCS / BV по запросу Источник питания 380 В / 50 Гц (настраиваемый) Поддерживается глобальное напряжение Что такое судовой поворотный кран Конструкция и принцип работы A…

Читать далее
Вершина