Haitai hydraulic stiff boom marine crane is a pedestal-mounted deck crane built around one rigid boom. Hydraulic cylinders luff it, a slewing drive turns it through a full circle, and a hydraulic winch does the lifting. With no telescopic sections or knuckle joint, the load chart stays easy to read and upkeep stays low. Standard models cover 0.5 t to 20 t, and heavy-duty cranes up to 50 t are custom-engineered to your deck drawing.
| Capacity (SWL) | Alcance máximo | Hoist Height | Giro | Power |
|---|---|---|---|---|
| 0.5 – 20 t standard, up to 50 t custom | Up to 40 m | 5-30 m | 360° continuo | Electro-hydraulic or diesel-hydraulic |
Stiff boom marine crane or fixed boom marine crane is one crane, two names.
Buyers search for this crane under both names, and they mean the same thing. “Stiff” and “fixed” describe the boom length only. The boom cannot extend or fold, but the crane itself is far from static: it luffs up and down, slews around its pedestal, and hoists at every radius on its load chart. Outreach is changed by luffing alone, which gives a simple, predictable working arc.

Main parts shown in the drawing: base unit, slewing mechanism, tower body, platform with control console, lifting winch, luffing cylinder, crane arm with angle indicator, guide pulley and hook. A dimensioned GA drawing for your vessel is issued after enquiry.
| Artículo | Especificación |
|---|---|
| Giro | 360° continuo |
| Izado | Hydraulic winch with brake, wire rope and hook block |
| Fuente de alimentación | Electric motor with pump set, or diesel engine power pack |
| Control | Control console on the crane platform, operator cabin, or wireless radio remote |
| Mounting | Pedestal with deck flange, bolted or welded |
| Protección contra la corrosión | Marine paint system to C5-M |
| Clasificación | CCS, ABS, LR, BV available on request |
Standard Capacities up to 20 Tons | Heavy-Duty Customization up to 50 Tons
| SWL (t) | Max. radius (m) | Min. radius (m) | Luffing time (s) | Slewing (r/min) | Hoist height (m) | Motor power (kW) |
|---|---|---|---|---|---|---|
| 0.5 | 5 – 12 | 1.3 – 2.6 | 60 | 1 | 5-30 | 7.5 |
| 1 | 6 – 12 | 1.3 – 2.6 | 60 | 1 | 5-25 | 11 |
| 2 | 5 – 15 | 1.1 – 3.2 | 60 | 1 | 5-25 | 15 |
| 3 | 8 – 18 | 1.7 – 3.8 | 70 | 0.9 | 5-25 | 22 |
| 5 | 12 – 20 | 2.5 – 4.2 | 80 | 0.75 | 5-20 | 37 |
| 8 | 12 – 20 | 2.5 – 4.2 | 100 | 0.75 | 5-20 | 55 |
| 10 | 12 – 20 | 2.5 – 4.2 | 110 | 0.75 | 5-20 | 75 |
| 15 | 12 – 20 | 2.5 – 4.2 | 110 | 0.6 | 5-15 | 90 |
| 20 | 16 – 25 | 3.2 – 5.3 | 120 | 0.6 | 5-15 | 2 × 75 |
| 25 (custom) | 20 – 30 | 3.2 – 6.3 | 130 | 0.5 | 5-10 | 2 × 90 |
| 30 (custom) | 30 | 3.2 – 6.3 | 140 | 0.4 | 5-10 | 2 × 90 |
| 35 (custom) | 20 – 35 | 4.2 – 7.4 | 150 | 0.5 | 5-10 | 2 × 110 |
| 40 (custom) | 20 – 35 | 4.2 – 7.4 | 150 | 0.5 | 5-10 | 2 × 140 |
| 45 (custom) | 25 – 40 | 5.3 – 8.5 | 160 | 0.45 | 5-10 | 2 × 140 |
| 50 (custom) | 25 – 40 | 5.3 – 8.5 | 170 | 0.45 | 5-10 | 2 × 165 |
Please Note: Configurations up to 20 tons are built to our proven, standardized designs for faster production and delivery. For heavy-duty operations require lifting capacities up to 50 tons, each crane must be custom-engineered based on your specific vessel parameters, classification society requirements, and deck stability needs. Shaded rows are custom-engineered. Hoisting speed is 15 m/min across the range, and rated load in kN is the SWL in tonnes multiplied by 10. Values are for reference only.
Two cranes with the same SWL can be very different machines once the duty cycle and the reach are different. We group typical orders into three bands, then tune each one to the vessel.
| Duty band | SWL | Superar a | Typical use |
|---|---|---|---|
| Light service | 0.5 – 3 t | 5 – 18 m | Stores, hoses, small equipment, platform maintenance |
| General deck and cargo | 5 – 15 t | 12 – 20 m | Hatch-side cargo, bunkering gear, wharf-side handling |
| Heavy and long reach | 20 t standard; up to 50 t custom | 16 – 40 m | Offshore supply, heavy equipment, project cargo |
Ranges are indicative. Every crane is designed against your load-at-radius requirement and deck arrangement.
The photos below show the same crane concept at three very different scales: a compact unit tucked among structure, a small unit on a platform edge, and a large unit working beside a quay.
Space around the lift point is often tight and the crane may need to serve one fixed area for years. A compact stiff boom crane with a short radius does that job with very few moving parts to maintain.


On smaller vessels, the crane lifts stores, tools and light equipment between deck and quay or between deck and a supply boat. A slim boom and a low pedestal keep the footprint small.


Larger boom sections, heavier pedestals and multi-fall wire rope take over as capacity rises. This is the version used for hatch-side cargo, spare parts and equipment lifts at the berth.
On tankers the crane stands among manifold pipework with little free deck. Its rigid boom, short stowage run and simple hydraulics suit lifts of hoses, spare parts and provisions between deck and quay.


Haitai Crane is a professional marine crane manufacturer in Fengqiu, Henan Province, China. We build every marine deck crane at our Henan factories, from boom fabrication and pedestal machining through to hydraulic assembly and painting. Before shipment we run function checks on luffing, slewing and hoisting, and we carry out a load test when the class society or the buyer requires one. Test documents go with the crane.
haitiano grúas para barcos marinos can be delivered with CCS, ABS, LR and BV certification. Please name the class society in your first enquiry so we can prepare the design approval package, material certificates and welding procedures in the right format from the start.


For a side-by-side view of all configurations, read our guide to the 7 types of marine cranes. If you are not sure which one fits, send us the deck plan and we will recommend one.
Fill in what you know and send it back. Even partial answers are enough for our engineers to start a dimensioned GA drawing, load chart and foundation reaction table.
| # | Item to confirm | Your requirement |
|---|---|---|
| 1 | SWL and the radius it must be lifted at | |
| 2 | Minimum and maximum working radius | |
| 3 | Hook height above and below the crane base | |
| 4 | Hoisting, luffing and slewing speed expectations | |
| 5 | Vessel type, size and crane position on deck | |
| 6 | Pedestal height and deck plate thickness at the foundation | |
| 7 | Boom rest position and free deck length for stowing | |
| 8 | Power source (ship supply voltage / frequency, or diesel power pack) | |
| 9 | Control type (stand, cabin or radio remote) | |
| 10 | Lifting attachment (hook, grab, rescue basket, other) | |
| 11 | Sea state, wind limit, ambient temperature and coating class | |
| 12 | Class society and inspection requirements | |
| 13 | Newbuild or retrofit, and target delivery date |
Whether you need a standard, cost-effective marine crane up to 20 tons or a heavily reinforced, customized offshore workhorse up to 50 tons, Haitai’s engineering team has you covered.
👉 Request a Custom GA Drawing & Quote Today.