Grue marine pour bateaux

Hydraulic Stiff Boom Marine Crane

Haitai hydraulic stiff boom marine crane is a pedestal-mounted deck crane built around one rigid boom: standard up to 20 t, custom up to 50 t, outreach to 40 m, 360° slewing, CCS/ABS/LR/BV available. Hydraulic cylinders luff it, a slewing drive turns it through a full circle, and a hydraulic winch does the lifting. With no telescopic sections or knuckle joint, the load chart stays easy to read and upkeep stays low.
  • SWL: 0.5ton – 20ton, up to 50ton custom
  • Outreach: 5m — 20m, up to 40m custom
  • Hoisting Height: 5m – 30m
  • Slewing: 360° continuous
Assurance qualité
sûr et stable
performances puissantes
service après-vente parfait

What Is Hydraulic Stiff Boom Marine Crane?

Haitai hydraulic stiff boom marine crane is a pedestal-mounted deck crane built around one rigid boom. Hydraulic cylinders luff it, a slewing drive turns it through a full circle, and a hydraulic winch does the lifting. With no telescopic sections or knuckle joint, the load chart stays easy to read and upkeep stays low. Standard models cover 0.5 t to 20 t, and heavy-duty cranes up to 50 t are custom-engineered to your deck drawing.

Capacity (SWL)Max OutreachHoist HeightRotationPower
0.5 – 20 t standard, up to 50 t customUp to 40 m5-30 m360° continuElectro-hydraulic or diesel-hydraulic

Stiff boom marine crane or fixed boom marine crane is one crane, two names.

Buyers search for this crane under both names, and they mean the same thing. “Stiff” and “fixed” describe the boom length only. The boom cannot extend or fold, but the crane itself is far from static: it luffs up and down, slews around its pedestal, and hoists at every radius on its load chart. Outreach is changed by luffing alone, which gives a simple, predictable working arc.

Demander un devis

Structure of A Haitai Stiff Boom Ship Crane

Illustration of a hydraulic stiff boom marine crane labeled welded box-section boom, hoisting winch and wire rope, hydraulic luffing cylinder, 360 degree slewing drive and deck pedestal
Illustration Image of a hydraulic stiff boom marine crane: Showing crane arm, luffing cylinder, lifting winch, tower body, control console, platform, slewing mechanism and base unit
  • Boom. A single welded box-section boom with a head sheave for the wire rope. There are no sliding wear pads and no articulation pins to inspect.
  • Luffing circuit. Hydraulic cylinders raise and lower the boom, with load-holding valves on the circuit so the boom stays where the operator leaves it.
  • Slewing drive. A slewing bearing turned by a hydraulic motor and gearbox, giving continuous 360° rotation without stops.
  • Hoisting winch. A hydraulic winch with a brake, wire rope and hook block. Single-fall or multi-fall reeving is chosen to match the rated load.
  • Pedestal. A welded column with a mounting flange for bolting or welding to the deck. We issue vertical load, horizontal shear and overturning moment figures for your naval architect.
  • Protection. Marine paint system to C5-M, IP-rated electrical enclosures, and limit switches. A load moment indicator is available as an option.

Main parts shown in the drawing: base unit, slewing mechanism, tower body, platform with control console, lifting winch, luffing cylinder, crane arm with angle indicator, guide pulley and hook. A dimensioned GA drawing for your vessel is issued after enquiry.

Technical Specification of Marine Stiff Boom Crane for Sale

1. Standard Configuration

ArticleSpécification
Rotation360° continu
LevageHydraulic winch with brake, wire rope and hook block
Source d'alimentationElectric motor with pump set, or diesel engine power pack
ContrôleControl console on the crane platform, operator cabin, or wireless radio remote
MountingPedestal with deck flange, bolted or welded
Protection contre la corrosionMarine paint system to C5-M
ClassificationCCS, ABS, LR, BV available on request

2. Main Parameters by Capacity

Standard Capacities up to 20 Tons | Heavy-Duty Customization up to 50 Tons

  • Standard Range: We offer readily available, standardized configurations for lifting capacities up to 20 tons (200 kN), designed for general deck and cargo handling.
  • Heavy-Duty & Large-Scale: For heavy lifting requirements from 20 tons to 50 tons (500 kN), we provide fully customized engineering tailored specifically to your vessel’s deck arrangement and duty cycle.
SWL (t)Max. radius (m)Min. radius (m)Luffing time (s)Slewing (r/min)Hoist height (m)Motor power (kW)
0.55 – 121.3 – 2.66015-307.5
16 – 121.3 – 2.66015-2511
25 – 151.1 – 3.26015-2515
38 – 181.7 – 3.8700.95-2522
512 – 202.5 – 4.2800.755-2037
812 – 202.5 – 4.21000.755-2055
1012 – 202.5 – 4.21100.755-2075
1512 – 202.5 – 4.21100.65-1590
2016 – 253.2 – 5.31200.65-152 × 75
25 (custom)20 – 303.2 – 6.31300.55-102 × 90
30 (custom)303.2 – 6.31400.45-102 × 90
35 (custom)20 – 354.2 – 7.41500.55-102 × 110
40 (custom)20 – 354.2 – 7.41500.55-102 × 140
45 (custom)25 – 405.3 – 8.51600.455-102 × 140
50 (custom)25 – 405.3 – 8.51700.455-102 × 165

Please Note: Configurations up to 20 tons are built to our proven, standardized designs for faster production and delivery. For heavy-duty operations require lifting capacities up to 50 tons, each crane must be custom-engineered based on your specific vessel parameters, classification society requirements, and deck stability needs. Shaded rows are custom-engineered. Hoisting speed is 15 m/min across the range, and rated load in kN is the SWL in tonnes multiplied by 10. Values are for reference only.

3. Configured by Duty, Not Just Tonnage

Two cranes with the same SWL can be very different machines once the duty cycle and the reach are different. We group typical orders into three bands, then tune each one to the vessel.

Duty bandSWLSensibilisationTypical use
Light service0.5 – 3 t5 – 18 mStores, hoses, small equipment, platform maintenance
General deck and cargo5 – 15 t12 – 20 mHatch-side cargo, bunkering gear, wharf-side handling
Heavy and long reach20 t standard; up to 50 t custom16 – 40 mOffshore supply, heavy equipment, project cargo

Ranges are indicative. Every crane is designed against your load-at-radius requirement and deck arrangement.

4. Power Pack and Control Options

  • Electro-hydraulic. An electric motor drives the pump set from the vessel’s own supply. This suits ships with spare generator capacity and keeps the crane quiet and clean.
  • Diesel-hydraulic. A diesel engine sits on the crane body and drives the pump directly, so the crane works without relying on ship’s power. This is the layout in the 5 t photo above, and it helps on barges, retrofit jobs and vessels with limited electrical capacity.
  • Operator control. Stand control puts the operator beside the load path. A cabin adds weather protection for long cargo shifts, and a radio remote lets the operator move to the best viewing position.

Where Does the Hydraulic Fixed Boom Crane?

The photos below show the same crane concept at three very different scales: a compact unit tucked among structure, a small unit on a platform edge, and a large unit working beside a quay.

✅️ Offshore Platforms and Fixed Installations

Space around the lift point is often tight and the crane may need to serve one fixed area for years. A compact stiff boom crane with a short radius does that job with very few moving parts to maintain.

Yellow Haitai hydraulic stiff boom marine crane SWL 1 t at 5 m mounted on a platform with an operator beside it
Yellow stiff boom crane SWL 1t-5m, mounted among structural steelwork on a platform level.
Red Haitai hydraulic stiff boom marine crane with boom stowed over tanker pipework
A red stiff boom crane on a tanker deck, boom stowed over the pipework.

✅️ Work Boats and Service Vessels

On smaller vessels, the crane lifts stores, tools and light equipment between deck and quay or between deck and a supply boat. A slim boom and a low pedestal keep the footprint small.

Red Haitai hydraulic stiff boom crane SWL 1 t at 5 m on a blue vessel platform with luffing cylinder
A red 1t-5m unit on a vessel platform. The luffing cylinder runs under the boom.
haitai hydraulic stiff boom marine crane fixed on a vessel deck
Yellow SWL 5 t at 15 m stiff boom marine crane fixed on a vessel deck.

✅️ Cargo Vessels and Wharf-Side Handling

Larger boom sections, heavier pedestals and multi-fall wire rope take over as capacity rises. This is the version used for hatch-side cargo, spare parts and equipment lifts at the berth.

✅️ Tankers and Pipework Decks

On tankers the crane stands among manifold pipework with little free deck. Its rigid boom, short stowage run and simple hydraulics suit lifts of hoses, spare parts and provisions between deck and quay.

Large cream hydraulic stiff boom marine crane on a vessel at a wharf with wire rope falls hanging from the boom head
A larger crane with a tapered boom and wide pedestal, working alongside a quay.
Two Haitai hydraulic stiff boom marine cranes, one white and one red, working on a tanker deck at a terminal
White and red stiff boom cranes working on a tanker deck.

Why Is Haitai’s Stiff Boom Marine Crane the Right Choice?

Built and Checked at Our Henan Factory

Haitai Crane is a professional marine crane manufacturer in Fengqiu, Henan Province, China. We build every marine deck crane at our Henan factories, from boom fabrication and pedestal machining through to hydraulic assembly and painting. Before shipment we run function checks on luffing, slewing and hoisting, and we carry out a load test when the class society or the buyer requires one. Test documents go with the crane.

Class Certification

Haitai grues de bateaux maritimes can be delivered with CCS, ABS, LR and BV certification. Please name the class society in your first enquiry so we can prepare the design approval package, material certificates and welding procedures in the right format from the start.

Hiatai Marine Cranes Fit Your Need

  • Haitai’s Stiff Boom Marine Cranes fit when the deck has room to rest the boom, the lifts are repeated, and the owner wants the fewest parts to look after.
  • Look at another type when stowed height is limited by a bridge or canal, or when the hook must reach under a structure. A knuckle boom or knuckle-telescopic crane suits those cases better.
Black Haitai hydraulic stiff boom crane SWL 1 t at 5.5 m fixed on a base platform in an outdoor factory
Black hydraulic fixed boom crane SWL 1-t5.5m, fixed on a base in an outdoor factory.
Grey-green Haitai hydraulic stiff boom crane SWL 5 t with boom extended in the factory yard
A 5 t crane in our factory yard with the boom out at low angle, ahead of delivery.

For a side-by-side view of all configurations, read our guide to the 7 types of marine cranes. If you are not sure which one fits, send us the deck plan and we will recommend one.

Request a General Arrangement Drawing

Fill in what you know and send it back. Even partial answers are enough for our engineers to start a dimensioned GA drawing, load chart and foundation reaction table.

#Item to confirmYour requirement
1SWL and the radius it must be lifted at 
2Minimum and maximum working radius 
3Hook height above and below the crane base 
4Hoisting, luffing and slewing speed expectations 
5Vessel type, size and crane position on deck 
6Pedestal height and deck plate thickness at the foundation 
7Boom rest position and free deck length for stowing 
8Power source (ship supply voltage / frequency, or diesel power pack) 
9Control type (stand, cabin or radio remote) 
10Lifting attachment (hook, grab, rescue basket, other) 
11Sea state, wind limit, ambient temperature and coating class 
12Class society and inspection requirements 
13Newbuild or retrofit, and target delivery date 

Whether you need a standard, cost-effective marine crane up to 20 tons or a heavily reinforced, customized offshore workhorse up to 50 tons, Haitai’s engineering team has you covered.

👉 Request a Custom GA Drawing & Quote Today.

Demander un devis

Leon
10+ Années d'expérience.
5,000+ Clients
50+ Pays

Simon

Spécialiste des solutions de grues · HT Crane

Spécialisés dans les solutions d'exportation de portiques, grues portuaires, grues à conteneurs, grues maritimes et ponts roulants. Plus de 10 ans d'expérience dans l'accompagnement de clients internationaux : conseils avant-vente, choix de la capacité et configurations sur mesure.

Distinctions et certificats

Service

Consultation technique avant-vente
Notre équipe d'ingénieurs analyse l'agencement de votre cour, vos besoins en débit et votre infrastructure avant de vous recommander une configuration. Nous vous fournissons gratuitement des propositions techniques, des plans d'aménagement et des calculs de charge avant tout engagement de votre part.
Tests d'acceptation en usine (FAT)
Toutes nos grues sont soumises à des essais de réception en pleine charge dans notre usine avant expédition. Les acheteurs peuvent assister à ces essais sur place ou par visioconférence. Un rapport d'essai et un certificat sont délivrés à l'issue des essais.
Installation et mise en service
Notre équipe d'intervention sur site prend en charge l'installation complète de la grue, la mise en service électrique et l'intégration du système dans vos locaux. La mise en service comprend la formation des opérateurs et la documentation de transfert.
Fourniture de pièces détachées
Nous disposons d'un stock mondial de pièces détachées pour tous les modèles de grues que nous fournissons. Les composants essentiels (élingues, moteurs de levage, variateurs de fréquence, modules PLC) sont disponibles pour une expédition sous 48 à 72 heures. Des contrats d'approvisionnement à long terme sont proposés aux exploitants de flottes.
Programmes de maintenance préventive
Nous proposons des contrats de maintenance annuels incluant les inspections, la lubrification, le remplacement des pièces d'usure et les audits de sécurité. Le diagnostic à distance via notre plateforme de surveillance des grues permet une détection précoce des pannes avant qu'elles n'entraînent des arrêts imprévus.
Garantie
Garantie standard : 24 mois à compter de la date de mise en service, couvrant les composants structurels, mécaniques et électriques dans des conditions normales d’utilisation. Extension de garantie et contrats de service disponibles.

Pourquoi nous choisir ?

Force puissante
Nos produits sont vendus directement par l'usine, avec une qualité garantie. Ils se vendent très bien partout au pays et ont reçu à maintes reprises d'excellents commentaires de la part de nos clients !
Expérimenté
Nos produits sont vendus directement par l'usine, avec une qualité garantie. Ils se vendent très bien partout au pays et ont reçu à maintes reprises d'excellents commentaires de la part de nos clients !
Assurance qualité
Nos produits sont vendus directement par l'usine, avec une qualité garantie. Ils se vendent très bien partout au pays et ont reçu à maintes reprises d'excellents commentaires de la part de nos clients !
Service sans souci
Nos produits sont vendus directement par l'usine, avec une qualité garantie. Ils se vendent très bien partout au pays et ont reçu à maintes reprises d'excellents commentaires de la part de nos clients !

Foire aux questions

Pour toute question restée sans réponse, veuillez contacter notre équipe d'assistance par courriel. Nous vous répondrons dans les plus brefs délais.
Q1: Is a hydraulic fixed boom crane the same as a hydraulic stiff boom crane?
Yes. Both names describe a boom of fixed length that does not telescope or fold. The crane still luffs, slews and hoists, so “fixed” refers to the boom structure and not to the crane’s movement.
Q2: How is the working radius changed if the boom cannot extend?
By luffing. The hydraulic cylinders raise or lower the boom, which brings the hook closer or moves it farther out. Rated capacity at each angle is shown on the load chart supplied with the crane.
Q3: Can the crane operate without power from the ship?
Yes. A diesel-hydraulic power pack mounted on the crane body runs the pumps independently, which suits barges, retrofits and vessels with limited generator capacity.
Q4: What do you need from me to prepare a quotation?
The SWL at maximum radius, the radius range, the hook height, the vessel type and crane position, the power supply, and the required class society. A deck plan or photo of the installation area helps us check boom rest and foundation.
Q5: Can the crane be certified by CCS, ABS, LR or BV?
Yes. We can deliver the crane with CCS, ABS, LR or BV certification. Tell us which society applies at enquiry stage so the approval documents are prepared on the right schedule.

Message

N'hésitez pas à nous contacter

Formulaire de contact
Veuillez préciser votre besoin en vous référant aux aspects suivants :
  • De quel produit de grue avez-vous besoin ?
  • Quelle est la capacité de levage maximale (en tonnes) requise pour votre projet ?
  • Pourriez-vous préciser la hauteur de levage (en mètres) nécessaire ?
  • Pouvez-vous fournir des détails sur l'environnement de travail, tels que la nature du sol, les limitations d'espace et les éventuels obstacles ?
  • Quelle est la fréquence d'utilisation prévue et la durée du projet ?

produits connexes

Marine Arm Crane-5
Grues à bras articulé marines – Grues à flèche articulée et grues à bras articulé pour navires commerciaux

Une grue marine à bras articulé est l'un des équipements de pont les plus polyvalents qu'un navire puisse embarquer. Contrairement à une grue de pont à flèche droite, une grue à flèche articulée se replie de manière compacte lorsqu'elle n'est pas utilisée, franchit les obstacles et positionne les charges avec une précision qu'une flèche fixe ne peut tout simplement pas égaler. Pour les armateurs et les équipes d'approvisionnement qui évaluent les options de grues de pont, le choix entre une grue à flèche droite et une grue à bras articulé se résume souvent à une question : votre opération exige-t-elle que la grue travaille dans des espaces restreints, atteigne des zones sous le niveau du pont ou manipule des charges aux positions irrégulières ? Si oui, une grue marine à bras articulé est presque certainement le bon choix. Cette page explique ce qu'est une grue marine à bras articulé, où elle est utilisée, la signification des principales spécifications et comment évaluer les fournisseurs avant de s'engager dans un achat. Qu'est-ce qu'une grue marine à bras articulé ? Le concept de base Une grue marine à bras articulé — également appelée grue à flèche articulée — utilise deux sections de flèche ou plus reliées par des articulations hydrauliques. Cette articulation permet à la grue de…

En savoir plus
Ship Deck Crane
Grues de pont de navire – Grues de chargement maritimes pour navires commerciaux et offshore

Choisir une grue de pont inadaptée peut engendrer des problèmes qui vous suivront tout au long de la durée de vie opérationnelle du navire. Capacité de levage insuffisante, portée réduite ou grue non certifiée par votre société de classification : chacun de ces facteurs peut retarder le dédouanement, augmenter les coûts d’exploitation ou engager votre responsabilité en cas d’incident. Cette page offre aux responsables des achats, aux armateurs et aux équipes d’achat des chantiers navals un aperçu clair et pratique des critères à prendre en compte lors de l’acquisition d’une grue de pont. Nous abordons les types d’équipements, les principaux paramètres techniques, les exigences de certification et les éléments qui distinguent un fournisseur fiable d’un fournisseur à risque. HT Crane fabrique et exporte des grues de pont couvrant toute la gamme de capacités, et chaque unité est garantie par une certification de société de classification, des essais de charge en usine et un service de pièces détachées à long terme. Qu’est-ce qu’une grue de pont ? Fonction principale : Une grue de pont est un appareil de levage rotatif installé en permanence sur le pont d’un navire. Elle assure le chargement et le déchargement des marchandises dans les ports où les équipements à terre sont indisponibles ou insuffisants. Elle facilite également les opérations sur le pont, les transferts d’équipements et les opérations de maintenance pendant la navigation.

En savoir plus
boat jib crane application
Grue à flèche pour bateau

Une grue à flèche pour bateaux est une solution de levage marine conçue spécifiquement pour les quais, les marinas, les chantiers navals et les plateformes offshore, où la corrosion due à l'eau salée, les espaces confinés et les charges dynamiques exigent un équipement répondant à des normes différentes. Les grues à flèche pour bateaux de HaiTai Crane offrent une capacité de levage de 0,5 à 20 tonnes, une rotation de 180° à 360° et une protection anticorrosion marine complète C4-C5, de la structure métallique aux armoires électriques. Référence rapide : Spécifications des grues à flèche pour bateaux Paramètre Gamme standard Sur mesure Disponible Capacité de levage 0,5 t – 20 t Jusqu’à 50 t sur demande Longueur de la flèche 3 m – 10 m Jusqu’à 15 m Angle de rotation 180° / 270° / 360° Configurable Hauteur de levage 3 m – 12 m Personnalisable Type de palan Électrique Chaîne / Câble Manuel disponible Mode de commande Bouton-poussoir / Télécommande radio Option cabine Protection anticorrosion Galvanisation à chaud + peinture marine C4/C5 ISO 12944 Type de montage Colonne / Mur / Encastré dans un quai Option quai flottant Certification CE, ISO 9001:2015 CCS / BV sur demande Alimentation 380 V / 50 Hz (personnalisable) Compatible avec toutes les tensions d’alimentation Qu’est-ce qu’une grue à flèche pour bateaux ? Structure et principe de fonctionnement…

En savoir plus
Haut