This case study covers Haitai’s export of a full piece of 5 ton portable gantry crane to the Philippines. It outlines the client’s operational requirements, structural design decisions, export process, and on-site performance. It is a practical reference for industrial buyers across Southeast Asia seeking a reliable, mobile light gantry crane solution.
Project Background: A Philippine Customer in Need of Flexible Lifting Gantry Crane
The Philippines has a growing manufacturing and fabrication sector, particularly across Luzon and the Visayas, where workshops handle a mix of metal components, molds, and fabricated assemblies.
The client is from a mid-sized metalworking firm in the Philippines, faced with a specific challenge: their facility had no overhead crane infrastructure, and installing a fixed gantry system would require structural modifications to the building frame.
They needed a 5 ton portable gantry crane that could be repositioned between bays, stored when not in use, and operated by a two-person team without specialist rigging crews.
After comparing several portable gantry crane suppliers from China, they selected Haitai based on the adjustable height feature and the availability of complete English-language documentation for customs and installation.
What the Philippines Client Actually Required?
Before engineering began, Haitai’s technical team held a video consultation with the Philippines buyer to map out operational parameters. The client’s heaviest individual lift was a 4.2 ton steel mold assembly, with occasional loads up to 4.8 tons. Working height needed to clear a 3 m workbench setup. Bay widths at the facility varied from 4.2 to 5.8 m, so the span had to be adjustable rather than fixed.
The client requested an electric chain hoist rather than manual, as the team performs multiple lifts per shift and operator fatigue was a documented issue with their previous manual setup. Haitai configured the 5 ton portable gantry crane with a span of 3.0 to 6.0 m (adjustable), a height range of 2.5 to 4.0 m, and a 5-ton electric chain hoist with pendant control — covering all scenarios the client described.
Table 1 — Haitai 5 Ton Portable Gantry Crane: Technical Specifications
| Parameter of PORTABLE GANTRY CRANE | Specification |
|---|---|
| Rated Capacity | 5 tonnes |
| Span (adjustable) | 3,000 – 6,000 mm |
| Height (adjustable) | 2,500 – 4,000 mm |
| Hoist Type | Electric chain hoist with pendant control |
| Lifting Speed | 3 / 0.8 m/min (dual speed) |
| Travel | Manual push on polyurethane castors |
| Castor Load Capacity | ≥ 5 ton rated, swivel + fixed combination |
| Structure Material | Q345B structural steel, welded |
| Surface Treatment | Shot blast + two-coat epoxy primer + topcoat |
| Certification | CE, ISO 9001 |
| Power Supply | 220V / 50Hz (Philippines-standard adapted) |
Design Highlights: Why 5 Ton Portable Gantry Crane Suited This Application?
A flexible 5 ton portable gantry crane offered this Philippine client three advantages that a fixed overhead crane could not.
- First, no civil or structural modifications were required — the crane stands on its own castor frame and is moved manually between positions.
- Second, the adjustable span and height mean one crane can serve multiple bays of different widths, replacing what might otherwise require two separate fixed installations.
- Third, the crane disassembles into manageable sections for storage or transport within the facility.
Haitai’s A-frame leg design — visible in the factory inspection images — uses bolted column sections with pin-connected diagonal braces. This design allows two workers to assemble or disassemble the crane in under 40 minutes.
The electric chain hoist with dual-speed pendant control added precision without adding complexity: the slow speed (0.8 m/min) is used for final positioning over fixtures, while the fast speed (3 m/min) handles routine pick-and-carry cycles.
Export Process: Shipping the 5 Ton Portable Gantry Crane to the Philippines
Exporting a 5 ton portable gantry crane to the Philippines is straightforward relative to heavier equipment, but it still requires careful packaging to prevent transit damage.
Haitai disassembled the crane into its main components — two A-frame leg assemblies, the main beam, the hoist trolley, and the electrical pendant — and packaged them in wooden crates with foam corner protection.
Total shipping volume was 2.8 CBM across two crates, fitting within a standard LCL (less-than-container-load) shipment from Tianjin port to Manila. Export documentation included a CE declaration of conformity, a packing list with individual component weights, a commercial invoice, and an installation and maintenance manual in English.
Transit time from factory gate to Manila port was 14 days. The client’s own maintenance team handled assembly on-site using the illustrated assembly manual, with Haitai’s technical team available via video call during the process.
Table 2 — Portable Gantry Crane vs. Fixed Overhead Crane: Philippines Workshop Comparison
| Factor | 5 Ton Portable Gantry Crane | Fixed Overhead Crane |
|---|---|---|
| Building Modification Required | None | Structural reinforcement needed |
| Installation Time | < 1 day (self-assembly) | 3–7 days (civil + electrical) |
| Repositionable Between Bays | Yes — manual push castor | No — fixed to runway |
| Storage When Not in Use | Yes — disassembles flat | Permanent installation |
| Approx. Equipment Cost | Lower | Higher (+ civil cost) |
| Lead Time from Haitai | 25–35 days | 45–70 days |
| Suitable for Rented Premises | Yes | Not recommended |
Performance After Delivery: Client Feedback to Haitai 5 Ton Portable Gantry Crane
Two months after delivery, the Philippines client provided feedback through Haitai’s post-sales follow-up process.
The crane had completed over 300 lift cycles across two workshop bays without any mechanical issues. The dual-speed electric chain hoist was specifically praised — operators noted a significant reduction in positioning time during mold-setting tasks. The adjustable span proved useful when the client rearranged one bay layout; they widened the crane span from 4.2 to 5.5 metres in approximately 25 minutes using two workers. One minor issue arose: a pendant control cable connector showed a loose contact after the first month.
The client contacted Haitai, received a replacement connector via courier within five days, and resolved the issue without disrupting operations. This level of after-sales response reinforced the client’s confidence in Haitai as a long-term supplier of industrial portable gantry crane equipment for their Philippines operations.
Takeaways for Industrial Buyers Considering a Portable Gantry Crane
This 5 ton portable gantry crane export to the Philippines demonstrates how a configurable, mobile lifting solution can serve workshops that lack the infrastructure for permanent installations.
For buyers across Southeast Asia evaluating similar equipment, the key decision points are: rated capacity relative to your heaviest anticipated load (always specify at least 10–15% headroom above peak load); span and height adjustability to cover multiple work areas; and supplier documentation quality for customs and local compliance.
Henan Haiati Crane, a professinal portable gantry crane supplier from China, with CE certification and English-language technical documentation significantly simplifies the import process in the Philippines and neighboring markets. If you are planning a similar project, contact Haitai with your bay dimensions, maximum load weight, and power supply details for a project-matched proposal.
For project inquiries, technical proposals, or portable gantry crane pricing for the Philippines and Southeast Asia, contact our export team.
FAQs about Haitai Crane — Portable Gantry Crane Manufacturer
Q1. What is the lead time for a 5-ton portable gantry crane from Haitai?
Standard production and delivery lead time for the Haitai 5-ton portable gantry crane is 25 to 35 days from order confirmation. This includes fabrication, surface treatment, factory acceptance testing, and export packaging. For the Philippines, shipping from Tianjin to Manila port adds 12 to 16 days. Buyers are advised to initiate the order at least six weeks before the target on-site delivery date to allow buffer for port clearance and local transport.
Q2. Does 5 ton portable gantry crane require a concrete foundation or anchoring?
No foundation or floor anchoring is required for standard operation. The Haitai 5-ton portable gantry crane is designed as a free-standing, floor-supported unit on heavy-duty castors. It is suitable for flat concrete or steel plate floors with a minimum bearing capacity of 3,000 kg/m². For lifting cycles involving significant lateral load — such as dragging rather than vertical lifts — Haitai recommends fitting optional outrigger feet to the base frame for added stability.
Q3. Can the mobile gantry crane be used outdoors in Philippine weather conditions?
The Haitai 5-ton portable gantry crane is primarily designed for indoor workshop use. Outdoor use is possible in dry conditions but requires additional precautions: the electric chain hoist motor and pendant control should be covered during rain, and the crane should be secured or stored indoors during high-wind conditions. For regular outdoor applications in the Philippines’ tropical climate, Haitai recommends specifying a higher IP-rated hoist enclosure and stainless steel hardware on the electrical components at the time of order.
Q4. What certifications are included with the Haitai portable gantry crane export?
All Haitai portable gantry cranes exported to the Philippines and other international markets include CE certification, an ISO 9001 quality management certificate, and a factory load test report. The documentation package also includes a material certificate for structural steel, weld inspection records, and an English-language installation and operation manual. If third-party inspection by SGS or Bureau Veritas is required for local import customs, Haitai can arrange this at an additional cost with approximately five to seven working days added to the lead time.
Q5. What is the maximum span available for the Haitai 5 ton portable gantry crane?
The standard adjustable span range for Haitai’s 5-ton portable gantry crane is 3m to 6m, as supplied to the Philippines client in this case study. For wider span requirements — up to 8m — Haitai offers a reinforced beam configuration with an additional mid-span support bracket. Spans beyond 8m at 5-ton capacity are generally not recommended in a portable configuration due to beam deflection limits; a semi-gantry or fixed gantry design would be more appropriate.
