Guindaste para barcos marítimos

Hydraulic Stiff Boom Marine Crane

Haitai hydraulic stiff boom marine crane is a pedestal-mounted deck crane built around one rigid boom: standard up to 20 t, custom up to 50 t, outreach to 40 m, 360° slewing, CCS/ABS/LR/BV available. Hydraulic cylinders luff it, a slewing drive turns it through a full circle, and a hydraulic winch does the lifting. With no telescopic sections or knuckle joint, the load chart stays easy to read and upkeep stays low.
  • SWL: 0.5ton – 20ton, up to 50ton custom
  • Outreach: 5m — 20m, up to 40m custom
  • Hoisting Height: 5m – 30m
  • Slewing: 360° continuous
Garantia de Qualidade
seguro e estável
desempenho poderoso
serviço pós-venda perfeito

What Is Hydraulic Stiff Boom Marine Crane?

Haitai hydraulic stiff boom marine crane is a pedestal-mounted deck crane built around one rigid boom. Hydraulic cylinders luff it, a slewing drive turns it through a full circle, and a hydraulic winch does the lifting. With no telescopic sections or knuckle joint, the load chart stays easy to read and upkeep stays low. Standard models cover 0.5 t to 20 t, and heavy-duty cranes up to 50 t are custom-engineered to your deck drawing.

Capacity (SWL)Alcance máximoHoist HeightGirandoPoder
0.5 – 20 t standard, up to 50 t customUp to 40 m5-30 m360° contínuoElectro-hydraulic or diesel-hydraulic

Stiff boom marine crane or fixed boom marine crane is one crane, two names.

Buyers search for this crane under both names, and they mean the same thing. “Stiff” and “fixed” describe the boom length only. The boom cannot extend or fold, but the crane itself is far from static: it luffs up and down, slews around its pedestal, and hoists at every radius on its load chart. Outreach is changed by luffing alone, which gives a simple, predictable working arc.

Solicite um orçamento

Structure of A Haitai Stiff Boom Ship Crane

Illustration of a hydraulic stiff boom marine crane labeled welded box-section boom, hoisting winch and wire rope, hydraulic luffing cylinder, 360 degree slewing drive and deck pedestal
Illustration Image of a hydraulic stiff boom marine crane: Showing crane arm, luffing cylinder, lifting winch, tower body, control console, platform, slewing mechanism and base unit
  • Boom. A single welded box-section boom with a head sheave for the wire rope. There are no sliding wear pads and no articulation pins to inspect.
  • Luffing circuit. Hydraulic cylinders raise and lower the boom, with load-holding valves on the circuit so the boom stays where the operator leaves it.
  • Slewing drive. A slewing bearing turned by a hydraulic motor and gearbox, giving continuous 360° rotation without stops.
  • Hoisting winch. A hydraulic winch with a brake, wire rope and hook block. Single-fall or multi-fall reeving is chosen to match the rated load.
  • Pedestal. A welded column with a mounting flange for bolting or welding to the deck. We issue vertical load, horizontal shear and overturning moment figures for your naval architect.
  • Protection. Marine paint system to C5-M, IP-rated electrical enclosures, and limit switches. A load moment indicator is available as an option.

Main parts shown in the drawing: base unit, slewing mechanism, tower body, platform with control console, lifting winch, luffing cylinder, crane arm with angle indicator, guide pulley and hook. A dimensioned GA drawing for your vessel is issued after enquiry.

Technical Specification of Marine Stiff Boom Crane for Sale

1. Standard Configuration

ItemEspecificação
Girando360° contínuo
IçamentoHydraulic winch with brake, wire rope and hook block
Power sourceElectric motor with pump set, or diesel engine power pack
ControlarControl console on the crane platform, operator cabin, or wireless radio remote
MountingPedestal with deck flange, bolted or welded
Proteção contra corrosãoMarine paint system to C5-M
ClassificaçãoCCS, ABS, LR, BV available on request

2. Main Parameters by Capacity

Standard Capacities up to 20 Tons | Heavy-Duty Customization up to 50 Tons

  • Standard Range: We offer readily available, standardized configurations for lifting capacities up to 20 tons (200 kN), designed for general deck and cargo handling.
  • Heavy-Duty & Large-Scale: For heavy lifting requirements from 20 tons to 50 tons (500 kN), we provide fully customized engineering tailored specifically to your vessel’s deck arrangement and duty cycle.
SWL (t)Max. radius (m)Min. radius (m)Luffing time (s)Slewing (r/min)Hoist height (m)Motor power (kW)
0.55 – 121.3 – 2.66015-307.5
16 – 121.3 – 2.66015-2511
25 – 151.1 – 3.26015-2515
38 – 181.7 – 3.8700.95-2522
512 – 202.5 – 4.2800.755-2037
812 – 202.5 – 4.21000.755-2055
1012 – 202.5 – 4.21100.755-2075
1512 – 202.5 – 4.21100.65-1590
2016 – 253.2 – 5.31200.65-152 × 75
25 (custom)20 – 303.2 – 6.31300.55-102 × 90
30 (custom)303.2 – 6.31400.45-102 × 90
35 (custom)20 – 354.2 – 7.41500.55-102 × 110
40 (custom)20 – 354.2 – 7.41500.55-102 × 140
45 (custom)25 – 405.3 – 8.51600.455-102 × 140
50 (custom)25 – 405.3 – 8.51700.455-102 × 165

Please Note: Configurations up to 20 tons are built to our proven, standardized designs for faster production and delivery. For heavy-duty operations require lifting capacities up to 50 tons, each crane must be custom-engineered based on your specific vessel parameters, classification society requirements, and deck stability needs. Shaded rows are custom-engineered. Hoisting speed is 15 m/min across the range, and rated load in kN is the SWL in tonnes multiplied by 10. Values are for reference only.

3. Configured by Duty, Not Just Tonnage

Two cranes with the same SWL can be very different machines once the duty cycle and the reach are different. We group typical orders into three bands, then tune each one to the vessel.

Duty bandSWLDivulgaçãoTypical use
Light service0.5 – 3 t5 – 18 mStores, hoses, small equipment, platform maintenance
General deck and cargo5 – 15 t12 – 20 mHatch-side cargo, bunkering gear, wharf-side handling
Heavy and long reach20 t standard; up to 50 t custom16 – 40 mOffshore supply, heavy equipment, project cargo

Ranges are indicative. Every crane is designed against your load-at-radius requirement and deck arrangement.

4. Power Pack and Control Options

  • Electro-hydraulic. An electric motor drives the pump set from the vessel’s own supply. This suits ships with spare generator capacity and keeps the crane quiet and clean.
  • Diesel-hydraulic. A diesel engine sits on the crane body and drives the pump directly, so the crane works without relying on ship’s power. This is the layout in the 5 t photo above, and it helps on barges, retrofit jobs and vessels with limited electrical capacity.
  • Operator control. Stand control puts the operator beside the load path. A cabin adds weather protection for long cargo shifts, and a radio remote lets the operator move to the best viewing position.

Where Does the Hydraulic Fixed Boom Crane?

The photos below show the same crane concept at three very different scales: a compact unit tucked among structure, a small unit on a platform edge, and a large unit working beside a quay.

✅️ Offshore Platforms and Fixed Installations

Space around the lift point is often tight and the crane may need to serve one fixed area for years. A compact stiff boom crane with a short radius does that job with very few moving parts to maintain.

Yellow Haitai hydraulic stiff boom marine crane SWL 1 t at 5 m mounted on a platform with an operator beside it
Yellow stiff boom crane SWL 1t-5m, mounted among structural steelwork on a platform level.
Red Haitai hydraulic stiff boom marine crane with boom stowed over tanker pipework
A red stiff boom crane on a tanker deck, boom stowed over the pipework.

✅️ Work Boats and Service Vessels

On smaller vessels, the crane lifts stores, tools and light equipment between deck and quay or between deck and a supply boat. A slim boom and a low pedestal keep the footprint small.

Red Haitai hydraulic stiff boom crane SWL 1 t at 5 m on a blue vessel platform with luffing cylinder
A red 1t-5m unit on a vessel platform. The luffing cylinder runs under the boom.
haitai hydraulic stiff boom marine crane fixed on a vessel deck
Yellow SWL 5 t at 15 m stiff boom marine crane fixed on a vessel deck.

✅️ Cargo Vessels and Wharf-Side Handling

Larger boom sections, heavier pedestals and multi-fall wire rope take over as capacity rises. This is the version used for hatch-side cargo, spare parts and equipment lifts at the berth.

✅️ Tankers and Pipework Decks

On tankers the crane stands among manifold pipework with little free deck. Its rigid boom, short stowage run and simple hydraulics suit lifts of hoses, spare parts and provisions between deck and quay.

Large cream hydraulic stiff boom marine crane on a vessel at a wharf with wire rope falls hanging from the boom head
A larger crane with a tapered boom and wide pedestal, working alongside a quay.
Two Haitai hydraulic stiff boom marine cranes, one white and one red, working on a tanker deck at a terminal
White and red stiff boom cranes working on a tanker deck.

Why Is Haitai’s Stiff Boom Marine Crane the Right Choice?

Built and Checked at Our Henan Factory

Haitai Crane is a professional marine crane manufacturer in Fengqiu, Henan Province, China. We build every marine deck crane at our Henan factories, from boom fabrication and pedestal machining through to hydraulic assembly and painting. Before shipment we run function checks on luffing, slewing and hoisting, and we carry out a load test when the class society or the buyer requires one. Test documents go with the crane.

Class Certification

Haitai marine boat cranes can be delivered with CCS, ABS, LR and BV certification. Please name the class society in your first enquiry so we can prepare the design approval package, material certificates and welding procedures in the right format from the start.

Hiatai Marine Cranes Fit Your Need

  • Haitai’s Stiff Boom Marine Cranes fit when the deck has room to rest the boom, the lifts are repeated, and the owner wants the fewest parts to look after.
  • Look at another type when stowed height is limited by a bridge or canal, or when the hook must reach under a structure. A knuckle boom or knuckle-telescopic crane suits those cases better.
Black Haitai hydraulic stiff boom crane SWL 1 t at 5.5 m fixed on a base platform in an outdoor factory
Black hydraulic fixed boom crane SWL 1-t5.5m, fixed on a base in an outdoor factory.
Grey-green Haitai hydraulic stiff boom crane SWL 5 t with boom extended in the factory yard
A 5 t crane in our factory yard with the boom out at low angle, ahead of delivery.

For a side-by-side view of all configurations, read our guide to the 7 types of marine cranes. If you are not sure which one fits, send us the deck plan and we will recommend one.

Request a General Arrangement Drawing

Fill in what you know and send it back. Even partial answers are enough for our engineers to start a dimensioned GA drawing, load chart and foundation reaction table.

#Item to confirmYour requirement
1SWL and the radius it must be lifted at 
2Minimum and maximum working radius 
3Hook height above and below the crane base 
4Hoisting, luffing and slewing speed expectations 
5Vessel type, size and crane position on deck 
6Pedestal height and deck plate thickness at the foundation 
7Boom rest position and free deck length for stowing 
8Power source (ship supply voltage / frequency, or diesel power pack) 
9Control type (stand, cabin or radio remote) 
10Lifting attachment (hook, grab, rescue basket, other) 
11Sea state, wind limit, ambient temperature and coating class 
12Class society and inspection requirements 
13Newbuild or retrofit, and target delivery date 

Whether you need a standard, cost-effective marine crane up to 20 tons or a heavily reinforced, customized offshore workhorse up to 50 tons, Haitai’s engineering team has you covered.

👉 Request a Custom GA Drawing & Quote Today.

Solicite um orçamento

Leon
10+ Anos de experiência.
5,000+ Clientes
50+ Países

Simão

Especialista em Soluções para Guindastes · Guindaste HT

Especializada em soluções para exportação de pontes rolantes, incluindo guindastes pórticos, guindastes portuários, guindastes para contêineres, guindastes para embarcações e pontes rolantes suspensas. Há mais de 10 anos, auxiliamos clientes globais com consultoria pré-venda, seleção de capacidade e configurações específicas para cada local.

Honras e Certificados

Serviço

Consultoria técnica pré-venda
Nossa equipe de engenharia analisa o layout do seu pátio, as necessidades de produção e a infraestrutura antes de recomendar uma configuração. Fornecemos propostas técnicas, desenhos de layout e cálculos de carga — sem custo algum — antes que você se comprometa com a compra.
Testes de Aceitação em Fábrica (TAF)
Todos os guindastes passam por testes de carga total em nossa fábrica antes do envio. Os compradores podem acompanhar o teste pessoalmente ou por videoconferência. Relatórios e certificados de teste são emitidos após a conclusão.
Instalação e Comissionamento
Nossa equipe de serviço no local cuida de toda a montagem do guindaste, comissionamento elétrico e integração do sistema em suas instalações. O comissionamento inclui treinamento de operadores e documentação de entrega.
Fornecimento de peças de reposição
Mantemos um estoque global de peças de reposição para todos os modelos de guindastes que fornecemos. Componentes críticos — spreaders, motores de içamento, inversores de frequência, módulos PLC — estão disponíveis para envio em 48 a 72 horas. Contratos de fornecimento de longo prazo estão disponíveis para operadores de frotas.
Programas de manutenção preventiva
Oferecemos contratos de manutenção anual que abrangem inspeções, lubrificação, substituição de peças de desgaste e auditorias de segurança. O diagnóstico remoto através da nossa plataforma de monitoramento de guindastes permite a identificação precoce de falhas antes que causem paradas não planejadas.
Garantia
Garantia padrão: 24 meses a partir da data de comissionamento, cobrindo componentes estruturais, mecânicos e elétricos em condições normais de operação. Garantia estendida e contratos de serviço disponíveis.

Por que nos escolher?

Força poderosa
Nossos produtos são vendidos diretamente da fábrica, com qualidade garantida. Eles têm ótima aceitação em todo o país e recebem feedbacks positivos de nossos clientes há muito tempo!
Experiente
Nossos produtos são vendidos diretamente da fábrica, com qualidade garantida. Eles têm ótima aceitação em todo o país e recebem feedbacks positivos de nossos clientes há muito tempo!
Garantia de Qualidade
Nossos produtos são vendidos diretamente da fábrica, com qualidade garantida. Eles têm ótima aceitação em todo o país e recebem feedbacks positivos de nossos clientes há muito tempo!
Serviço sem preocupações
Nossos produtos são vendidos diretamente da fábrica, com qualidade garantida. Eles têm ótima aceitação em todo o país e recebem feedbacks positivos de nossos clientes há muito tempo!

Perguntas frequentes

Caso ainda tenha alguma dúvida, entre em contato com nossa equipe de suporte por e-mail. Responderemos o mais breve possível para ajudá-lo(a).
Q1: Is a hydraulic fixed boom crane the same as a hydraulic stiff boom crane?
Yes. Both names describe a boom of fixed length that does not telescope or fold. The crane still luffs, slews and hoists, so “fixed” refers to the boom structure and not to the crane’s movement.
Q2: How is the working radius changed if the boom cannot extend?
By luffing. The hydraulic cylinders raise or lower the boom, which brings the hook closer or moves it farther out. Rated capacity at each angle is shown on the load chart supplied with the crane.
Q3: Can the crane operate without power from the ship?
Yes. A diesel-hydraulic power pack mounted on the crane body runs the pumps independently, which suits barges, retrofits and vessels with limited generator capacity.
Q4: What do you need from me to prepare a quotation?
The SWL at maximum radius, the radius range, the hook height, the vessel type and crane position, the power supply, and the required class society. A deck plan or photo of the installation area helps us check boom rest and foundation.
Q5: Can the crane be certified by CCS, ABS, LR or BV?
Yes. We can deliver the crane with CCS, ABS, LR or BV certification. Tell us which society applies at enquiry stage so the approval documents are prepared on the right schedule.

Mensagem

Sinta-se à vontade para entrar em contato conosco.

Formulário de contato
Por favor, especifique sua necessidade considerando os seguintes aspectos:
  • De qual produto de guindaste você precisa?
  • Qual é a capacidade máxima de elevação (em toneladas) necessária para o seu projeto?
  • Poderia especificar a altura de elevação (em metros) necessária?
  • Poderia fornecer detalhes sobre o ambiente de trabalho, como as condições do solo, as limitações de espaço e quaisquer obstáculos?
  • Qual a frequência de uso esperada e a duração do projeto?

produtos relacionados

Marine Arm Crane-5
Guindaste Marítimo de Braço Articulado – Guindastes Articulados e de Lança Articulada para Embarcações Comerciais

Um guindaste de braço articulado marítimo é um dos equipamentos de convés mais versáteis que uma embarcação pode transportar. Ao contrário de um guindaste de convés com lança fixa, um guindaste de braço articulado se dobra de forma compacta quando não está em uso, alcança locais acima de obstáculos e posiciona cargas com uma precisão que uma lança fixa simplesmente não consegue igualar. Para armadores e equipes de compras que avaliam opções de guindastes de convés, a escolha entre um guindaste de lança fixa e um guindaste de braço articulado geralmente se resume a uma pergunta: sua operação exige que o guindaste trabalhe em espaços confinados, alcance locais abaixo do nível do convés ou lide com posições de carga irregulares? Se sim, um guindaste de braço articulado marítimo é quase certamente a escolha certa. Esta página aborda o que são guindastes de braço articulado marítimo, onde são usados, o que significam as principais especificações e como avaliar fornecedores antes de se comprometer com uma compra. O que é um guindaste de braço articulado marítimo? O conceito básico de projeto Um guindaste de braço articulado marítimo — também chamado de guindaste de lança articulada ou guindaste marítimo articulado — usa duas ou mais seções de lança conectadas por juntas articuladas hidráulicas. Essa articulação permite que o guindaste…

Leia mais
Ship Deck Crane
Guindaste de convés para navios – Guindastes de carga marítima para embarcações comerciais e offshore

Selecionar o guindaste de convés errado cria problemas que o acompanharão por toda a vida útil da embarcação. Capacidade de elevação inadequada, alcance insuficiente ou um guindaste não certificado pela sua sociedade classificadora — qualquer um desses fatores pode atrasar a liberação portuária, aumentar os custos operacionais ou gerar exposição a responsabilidades em caso de incidente. Esta página oferece aos gerentes de compras, armadores e equipes de compras de estaleiros uma visão geral clara e prática do que procurar ao adquirir um guindaste de convés. Abordamos os tipos de equipamentos, os principais parâmetros técnicos, os requisitos de certificação e o que distingue um fornecedor confiável de um arriscado. A HT Crane fabrica e exporta guindastes de convés em toda a gama de capacidades — e garantimos a certificação de cada unidade pela sociedade classificadora, testes de carga em fábrica e suporte de peças de reposição a longo prazo. O que é um guindaste de convés? A função básica Um guindaste de convés é um dispositivo de elevação rotativo montado permanentemente no convés de uma embarcação. Ele lida com o carregamento e descarregamento de carga em portos onde o equipamento em terra não está disponível ou é insuficiente. Também auxilia nas operações de convés, transferências de equipamentos e içamentos de manutenção durante a viagem. Embarcação…

Leia mais
boat jib crane application
Guindaste de barco

Um guindaste de lança para barcos é uma solução de elevação de nível marítimo projetada especificamente para docas, marinas, estaleiros e plataformas offshore — onde a corrosão por água salgada, espaços confinados e cargas dinâmicas exigem equipamentos construídos com um padrão diferenciado. Os guindastes de lança para barcos da HaiTai Crane oferecem capacidade de elevação de 0,5 a 20 toneladas, rotação de 180° a 360° e proteção completa contra corrosão marítima C4-C5, desde a estrutura de aço até os painéis elétricos. Referência Rápida: Especificações do Guindaste de Lança para Barco Parâmetro Faixa Padrão Personalizada Disponível Capacidade de Elevação 0,5 t – 20 t Até 50 t sob encomenda Comprimento da Lança (Balão) 3 m – 10 m Até 15 m Ângulo de Rotação 180° / 270° / 360° Configurável Altura de Elevação 3 m – 12 m Personalizável Tipo de Guincho Corrente elétrica / Cabo de aço Manual disponível Modo de Controle Botão / Controle remoto via rádio Opção de cabine Proteção contra Corrosão Galvanização a quente + pintura marítima C4/C5 ISO 12944 Tipo de Montagem Coluna / Parede / Embutida em doca Opção de doca flutuante Certificação CE, ISO 9001:2015 CCS / BV sob encomenda Alimentação 380V / 50Hz (personalizável) Tensão global suportada O que é um Guindaste de Lança para Barco? Estrutura e Princípio de Funcionamento A…

Leia mais
Principal