Grúa para embarcaciones marinas

Hydraulic Stiff Boom Marine Crane

Haitai hydraulic stiff boom marine crane is a pedestal-mounted deck crane built around one rigid boom: standard up to 20 t, custom up to 50 t, outreach to 40 m, 360° slewing, CCS/ABS/LR/BV available. Hydraulic cylinders luff it, a slewing drive turns it through a full circle, and a hydraulic winch does the lifting. With no telescopic sections or knuckle joint, the load chart stays easy to read and upkeep stays low.
  • SWL: 0.5ton – 20ton, up to 50ton custom
  • Outreach: 5m — 20m, up to 40m custom
  • Hoisting Height: 5m – 30m
  • Slewing: 360° continuous
Seguro de calidad
seguro y estable
rendimiento potente
servicio postventa perfecto

What Is Hydraulic Stiff Boom Marine Crane?

Haitai hydraulic stiff boom marine crane is a pedestal-mounted deck crane built around one rigid boom. Hydraulic cylinders luff it, a slewing drive turns it through a full circle, and a hydraulic winch does the lifting. With no telescopic sections or knuckle joint, the load chart stays easy to read and upkeep stays low. Standard models cover 0.5 t to 20 t, and heavy-duty cranes up to 50 t are custom-engineered to your deck drawing.

Capacity (SWL)Alcance máximoHoist HeightGiroPower
0.5 – 20 t standard, up to 50 t customUp to 40 m5-30 m360° continuoElectro-hydraulic or diesel-hydraulic

Stiff boom marine crane or fixed boom marine crane is one crane, two names.

Buyers search for this crane under both names, and they mean the same thing. “Stiff” and “fixed” describe the boom length only. The boom cannot extend or fold, but the crane itself is far from static: it luffs up and down, slews around its pedestal, and hoists at every radius on its load chart. Outreach is changed by luffing alone, which gives a simple, predictable working arc.

Solicitar presupuesto

Structure of A Haitai Stiff Boom Ship Crane

Illustration of a hydraulic stiff boom marine crane labeled welded box-section boom, hoisting winch and wire rope, hydraulic luffing cylinder, 360 degree slewing drive and deck pedestal
Illustration Image of a hydraulic stiff boom marine crane: Showing crane arm, luffing cylinder, lifting winch, tower body, control console, platform, slewing mechanism and base unit
  • Boom. A single welded box-section boom with a head sheave for the wire rope. There are no sliding wear pads and no articulation pins to inspect.
  • Luffing circuit. Hydraulic cylinders raise and lower the boom, with load-holding valves on the circuit so the boom stays where the operator leaves it.
  • Slewing drive. A slewing bearing turned by a hydraulic motor and gearbox, giving continuous 360° rotation without stops.
  • Hoisting winch. A hydraulic winch with a brake, wire rope and hook block. Single-fall or multi-fall reeving is chosen to match the rated load.
  • Pedestal. A welded column with a mounting flange for bolting or welding to the deck. We issue vertical load, horizontal shear and overturning moment figures for your naval architect.
  • Protection. Marine paint system to C5-M, IP-rated electrical enclosures, and limit switches. A load moment indicator is available as an option.

Main parts shown in the drawing: base unit, slewing mechanism, tower body, platform with control console, lifting winch, luffing cylinder, crane arm with angle indicator, guide pulley and hook. A dimensioned GA drawing for your vessel is issued after enquiry.

Technical Specification of Marine Stiff Boom Crane for Sale

1. Standard Configuration

ArtículoEspecificación
Giro360° continuo
IzadoHydraulic winch with brake, wire rope and hook block
Fuente de alimentaciónElectric motor with pump set, or diesel engine power pack
ControlControl console on the crane platform, operator cabin, or wireless radio remote
MountingPedestal with deck flange, bolted or welded
Protección contra la corrosiónMarine paint system to C5-M
ClasificaciónCCS, ABS, LR, BV available on request

2. Main Parameters by Capacity

Standard Capacities up to 20 Tons | Heavy-Duty Customization up to 50 Tons

  • Standard Range: We offer readily available, standardized configurations for lifting capacities up to 20 tons (200 kN), designed for general deck and cargo handling.
  • Heavy-Duty & Large-Scale: For heavy lifting requirements from 20 tons to 50 tons (500 kN), we provide fully customized engineering tailored specifically to your vessel’s deck arrangement and duty cycle.
SWL (t)Max. radius (m)Min. radius (m)Luffing time (s)Slewing (r/min)Hoist height (m)Motor power (kW)
0.55 – 121.3 – 2.66015-307.5
16 – 121.3 – 2.66015-2511
25 – 151.1 – 3.26015-2515
38 – 181.7 – 3.8700.95-2522
512 – 202.5 – 4.2800.755-2037
812 – 202.5 – 4.21000.755-2055
1012 – 202.5 – 4.21100.755-2075
1512 – 202.5 – 4.21100.65-1590
2016 – 253.2 – 5.31200.65-152 × 75
25 (custom)20 – 303.2 – 6.31300.55-102 × 90
30 (custom)303.2 – 6.31400.45-102 × 90
35 (custom)20 – 354.2 – 7.41500.55-102 × 110
40 (custom)20 – 354.2 – 7.41500.55-102 × 140
45 (custom)25 – 405.3 – 8.51600.455-102 × 140
50 (custom)25 – 405.3 – 8.51700.455-102 × 165

Please Note: Configurations up to 20 tons are built to our proven, standardized designs for faster production and delivery. For heavy-duty operations require lifting capacities up to 50 tons, each crane must be custom-engineered based on your specific vessel parameters, classification society requirements, and deck stability needs. Shaded rows are custom-engineered. Hoisting speed is 15 m/min across the range, and rated load in kN is the SWL in tonnes multiplied by 10. Values are for reference only.

3. Configured by Duty, Not Just Tonnage

Two cranes with the same SWL can be very different machines once the duty cycle and the reach are different. We group typical orders into three bands, then tune each one to the vessel.

Duty bandSWLSuperar aTypical use
Light service0.5 – 3 t5 – 18 mStores, hoses, small equipment, platform maintenance
General deck and cargo5 – 15 t12 – 20 mHatch-side cargo, bunkering gear, wharf-side handling
Heavy and long reach20 t standard; up to 50 t custom16 – 40 mOffshore supply, heavy equipment, project cargo

Ranges are indicative. Every crane is designed against your load-at-radius requirement and deck arrangement.

4. Power Pack and Control Options

  • Electro-hydraulic. An electric motor drives the pump set from the vessel’s own supply. This suits ships with spare generator capacity and keeps the crane quiet and clean.
  • Diesel-hydraulic. A diesel engine sits on the crane body and drives the pump directly, so the crane works without relying on ship’s power. This is the layout in the 5 t photo above, and it helps on barges, retrofit jobs and vessels with limited electrical capacity.
  • Operator control. Stand control puts the operator beside the load path. A cabin adds weather protection for long cargo shifts, and a radio remote lets the operator move to the best viewing position.

Where Does the Hydraulic Fixed Boom Crane?

The photos below show the same crane concept at three very different scales: a compact unit tucked among structure, a small unit on a platform edge, and a large unit working beside a quay.

✅️ Offshore Platforms and Fixed Installations

Space around the lift point is often tight and the crane may need to serve one fixed area for years. A compact stiff boom crane with a short radius does that job with very few moving parts to maintain.

Yellow Haitai hydraulic stiff boom marine crane SWL 1 t at 5 m mounted on a platform with an operator beside it
Yellow stiff boom crane SWL 1t-5m, mounted among structural steelwork on a platform level.
Red Haitai hydraulic stiff boom marine crane with boom stowed over tanker pipework
A red stiff boom crane on a tanker deck, boom stowed over the pipework.

✅️ Work Boats and Service Vessels

On smaller vessels, the crane lifts stores, tools and light equipment between deck and quay or between deck and a supply boat. A slim boom and a low pedestal keep the footprint small.

Red Haitai hydraulic stiff boom crane SWL 1 t at 5 m on a blue vessel platform with luffing cylinder
A red 1t-5m unit on a vessel platform. The luffing cylinder runs under the boom.
haitai hydraulic stiff boom marine crane fixed on a vessel deck
Yellow SWL 5 t at 15 m stiff boom marine crane fixed on a vessel deck.

✅️ Cargo Vessels and Wharf-Side Handling

Larger boom sections, heavier pedestals and multi-fall wire rope take over as capacity rises. This is the version used for hatch-side cargo, spare parts and equipment lifts at the berth.

✅️ Tankers and Pipework Decks

On tankers the crane stands among manifold pipework with little free deck. Its rigid boom, short stowage run and simple hydraulics suit lifts of hoses, spare parts and provisions between deck and quay.

Large cream hydraulic stiff boom marine crane on a vessel at a wharf with wire rope falls hanging from the boom head
A larger crane with a tapered boom and wide pedestal, working alongside a quay.
Two Haitai hydraulic stiff boom marine cranes, one white and one red, working on a tanker deck at a terminal
White and red stiff boom cranes working on a tanker deck.

Why Is Haitai’s Stiff Boom Marine Crane the Right Choice?

Built and Checked at Our Henan Factory

Haitai Crane is a professional marine crane manufacturer in Fengqiu, Henan Province, China. We build every marine deck crane at our Henan factories, from boom fabrication and pedestal machining through to hydraulic assembly and painting. Before shipment we run function checks on luffing, slewing and hoisting, and we carry out a load test when the class society or the buyer requires one. Test documents go with the crane.

Class Certification

haitiano grúas para barcos marinos can be delivered with CCS, ABS, LR and BV certification. Please name the class society in your first enquiry so we can prepare the design approval package, material certificates and welding procedures in the right format from the start.

Hiatai Marine Cranes Fit Your Need

  • Haitai’s Stiff Boom Marine Cranes fit when the deck has room to rest the boom, the lifts are repeated, and the owner wants the fewest parts to look after.
  • Look at another type when stowed height is limited by a bridge or canal, or when the hook must reach under a structure. A knuckle boom or knuckle-telescopic crane suits those cases better.
Black Haitai hydraulic stiff boom crane SWL 1 t at 5.5 m fixed on a base platform in an outdoor factory
Black hydraulic fixed boom crane SWL 1-t5.5m, fixed on a base in an outdoor factory.
Grey-green Haitai hydraulic stiff boom crane SWL 5 t with boom extended in the factory yard
A 5 t crane in our factory yard with the boom out at low angle, ahead of delivery.

For a side-by-side view of all configurations, read our guide to the 7 types of marine cranes. If you are not sure which one fits, send us the deck plan and we will recommend one.

Request a General Arrangement Drawing

Fill in what you know and send it back. Even partial answers are enough for our engineers to start a dimensioned GA drawing, load chart and foundation reaction table.

#Item to confirmYour requirement
1SWL and the radius it must be lifted at 
2Minimum and maximum working radius 
3Hook height above and below the crane base 
4Hoisting, luffing and slewing speed expectations 
5Vessel type, size and crane position on deck 
6Pedestal height and deck plate thickness at the foundation 
7Boom rest position and free deck length for stowing 
8Power source (ship supply voltage / frequency, or diesel power pack) 
9Control type (stand, cabin or radio remote) 
10Lifting attachment (hook, grab, rescue basket, other) 
11Sea state, wind limit, ambient temperature and coating class 
12Class society and inspection requirements 
13Newbuild or retrofit, and target delivery date 

Whether you need a standard, cost-effective marine crane up to 20 tons or a heavily reinforced, customized offshore workhorse up to 50 tons, Haitai’s engineering team has you covered.

👉 Request a Custom GA Drawing & Quote Today.

Solicitar presupuesto

Leon
10+ Años de experiencia.
5,000+ Clientes
50+ Países

Simón

Especialista en soluciones de grúas · HT Crane

Especializados en soluciones de exportación de grúas pórtico, grúas portuarias, grúas portacontenedores, grúas marítimas y grúas puente. Más de 10 años ayudando a clientes internacionales con consultoría de preventa, selección de capacidad y configuraciones específicas para cada emplazamiento.

Honores y Certificados

Servicio

Consultoría técnica de preventa
Nuestro equipo de ingeniería analiza el diseño de su patio, los requisitos de rendimiento y la infraestructura antes de recomendarle una configuración. Le proporcionamos propuestas técnicas, planos de distribución y cálculos de carga, sin costo alguno, antes de que realice la compra.
Pruebas de aceptación en fábrica (FAT)
Todas las grúas se someten a pruebas de carga completa en nuestra fábrica antes del envío. Los compradores pueden presenciar la prueba en persona o mediante videoconferencia. Se emiten informes y certificados al finalizar las pruebas.
Instalación y puesta en marcha
Nuestro equipo de servicio in situ se encarga del montaje completo de la grúa, la puesta en marcha eléctrica y la integración del sistema en sus instalaciones. La puesta en marcha incluye la formación del operador y la documentación de entrega.
Suministro de repuestos
Mantenemos un inventario global de repuestos para todos los modelos de grúas que suministramos. Los componentes críticos —separadores, motores de elevación, variadores de frecuencia, módulos PLC— están disponibles para su envío en un plazo de 48 a 72 horas. Ofrecemos contratos de suministro a largo plazo para operadores de flotas.
Programas de mantenimiento preventivo
Ofrecemos contratos de mantenimiento anuales que incluyen inspecciones, lubricación, reemplazo de piezas de desgaste y auditorías de seguridad. El diagnóstico remoto mediante nuestra plataforma de monitorización de grúas permite la detección temprana de fallos antes de que provoquen paradas no planificadas.
Garantía
Garantía estándar: 24 meses a partir de la fecha de puesta en marcha, que cubre los componentes estructurales, mecánicos y eléctricos en condiciones normales de funcionamiento. Disponemos de garantías extendidas y contratos de servicio.

¿Por qué elegirnos?

Poderosa fuerza
Nuestros productos se venden directamente de fábrica con calidad garantizada. Se venden muy bien en todo el país y han recibido excelentes comentarios de los clientes en repetidas ocasiones.
Experimentado
Nuestros productos se venden directamente de fábrica con calidad garantizada. Se venden muy bien en todo el país y han recibido excelentes comentarios de los clientes en repetidas ocasiones.
Seguro de calidad
Nuestros productos se venden directamente de fábrica con calidad garantizada. Se venden muy bien en todo el país y han recibido excelentes comentarios de los clientes en repetidas ocasiones.
Servicio sin preocupaciones
Nuestros productos se venden directamente de fábrica con calidad garantizada. Se venden muy bien en todo el país y han recibido excelentes comentarios de los clientes en repetidas ocasiones.

Preguntas frecuentes

Si tiene alguna pregunta sin respuesta, póngase en contacto con nuestro equipo de soporte por correo electrónico. Le responderemos lo antes posible para ayudarle.
Q1: Is a hydraulic fixed boom crane the same as a hydraulic stiff boom crane?
Yes. Both names describe a boom of fixed length that does not telescope or fold. The crane still luffs, slews and hoists, so “fixed” refers to the boom structure and not to the crane’s movement.
Q2: How is the working radius changed if the boom cannot extend?
By luffing. The hydraulic cylinders raise or lower the boom, which brings the hook closer or moves it farther out. Rated capacity at each angle is shown on the load chart supplied with the crane.
Q3: Can the crane operate without power from the ship?
Yes. A diesel-hydraulic power pack mounted on the crane body runs the pumps independently, which suits barges, retrofits and vessels with limited generator capacity.
Q4: What do you need from me to prepare a quotation?
The SWL at maximum radius, the radius range, the hook height, the vessel type and crane position, the power supply, and the required class society. A deck plan or photo of the installation area helps us check boom rest and foundation.
Q5: Can the crane be certified by CCS, ABS, LR or BV?
Yes. We can deliver the crane with CCS, ABS, LR or BV certification. Tell us which society applies at enquiry stage so the approval documents are prepared on the right schedule.

Mensaje

No dudes en contactarnos.

Formulario de contacto
Por favor, especifique sus requisitos haciendo referencia a los siguientes aspectos:
  • ¿Qué tipo de grúa necesita?
  • ¿Cuál es la capacidad máxima de elevación (en toneladas) requerida para su proyecto?
  • ¿Podría especificar la altura de elevación necesaria (en metros)?
  • ¿Podría proporcionarnos detalles sobre el entorno de trabajo, como las condiciones del terreno, las limitaciones de espacio y cualquier obstáculo?
  • ¿Cuál es la frecuencia de uso prevista y la duración del proyecto?

productos relacionados

Marine Arm Crane-5
Grúas marinas de brazo articulado y grúas articuladas para buques comerciales

Una grúa marina de brazo articulado es uno de los equipos de cubierta más versátiles que puede transportar un buque. A diferencia de una grúa de cubierta de pluma recta, una grúa de pluma articulada se pliega de forma compacta cuando no está en uso, supera obstáculos y posiciona cargas con una precisión que una pluma fija simplemente no puede igualar. Para los armadores y los equipos de compras que evalúan las opciones de grúas de cubierta, la elección entre una pluma recta y una grúa de brazo articulado a menudo se reduce a una pregunta: ¿su operación requiere que la grúa trabaje en espacios confinados, alcance por debajo del nivel de la cubierta o maneje posiciones de carga irregulares? Si la respuesta es sí, una grúa marina de brazo articulado es casi con seguridad la opción correcta. Esta página explica qué son las grúas marinas de brazo articulado, dónde se utilizan, qué significan las especificaciones clave y cómo evaluar a los proveedores antes de comprometerse con una compra. ¿Qué es una grúa marina de brazo articulado? El concepto de diseño principal Una grúa marina de brazo articulado, también llamada grúa de pluma articulada o grúa marina articulada, utiliza dos o más secciones de pluma conectadas por articulaciones articuladas de accionamiento hidráulico. Esta articulación permite que la grúa…

Leer más
Ship Deck Crane
Grúa de cubierta de barco – Grúas de carga marítimas para buques comerciales y plataformas petrolíferas

Seleccionar la grúa de cubierta incorrecta crea problemas que lo acompañarán durante toda la vida útil del buque. Capacidad de elevación insuficiente, alcance deficiente o una grúa no certificada por su sociedad de clasificación: cualquiera de estos factores puede retrasar el despacho portuario, aumentar los costos operativos o generar responsabilidad en caso de un incidente. Esta página ofrece a los gerentes de compras, armadores y equipos de compras de astilleros una visión general clara y práctica de qué buscar al adquirir una grúa de cubierta. Cubrimos los tipos de equipos, los parámetros técnicos clave, los requisitos de certificación y lo que distingue a un proveedor confiable de uno riesgoso. HT Crane fabrica y exporta grúas de cubierta en toda la gama de capacidades, y respaldamos cada unidad con la certificación de la sociedad de clasificación, pruebas de carga en fábrica y soporte de repuestos a largo plazo. ¿Qué es una grúa de cubierta? Función básica Una grúa de cubierta es un dispositivo de elevación giratorio montado permanentemente en la cubierta de un buque. Se encarga de la carga y descarga de mercancías en puertos donde el equipo terrestre no está disponible o es insuficiente. También apoya las operaciones de cubierta, las transferencias de equipos y las elevaciones de mantenimiento durante el viaje. Buque…

Leer más
boat jib crane application
Grúa de pluma para barcos

Una grúa de pluma para embarcaciones es una solución de elevación de grado marino diseñada específicamente para muelles, puertos deportivos, astilleros y plataformas marinas, donde la corrosión del agua salada, los espacios confinados y las cargas dinámicas exigen equipos fabricados con estándares diferentes. Las grúas de pluma para embarcaciones de HaiTai Crane ofrecen una capacidad de elevación de 0,5 a 20 toneladas, una rotación de 180° a 360° y una protección completa contra la corrosión marina C4-C5, desde el acero estructural hasta los gabinetes eléctricos. Referencia rápida: Especificaciones de la grúa de pluma para barcos Parámetros Estándar Rango Personalizado Disponible Capacidad de elevación 0,5 t – 20 t Hasta 50 t bajo pedido Longitud de la pluma (brazo) 3 m – 10 m Hasta 15 m Ángulo de rotación 180° / 270° / 360° Configurable Altura de elevación 3 m – 12 m Personalizable Tipo de polipasto Cadena eléctrica / Cable de acero Manual disponible Modo de control Botón pulsador / Control remoto por radio Opción de cabina Protección contra la corrosión Galvanizado en caliente + pintura marina C4/C5 ISO 12944 Tipo de montaje Columna / Pared / Muelle empotrado Opción de muelle flotante Certificación CE, ISO 9001:2015 CCS / BV bajo pedido Alimentación eléctrica 380 V / 50 Hz (personalizable) Voltaje global compatible ¿Qué es una grúa de pluma para barcos? Estructura y principio de funcionamiento A…

Leer más
Arriba