رافعة قوارب بحرية

Hydraulic Telescopic Boom Marine Crane

Haitai hydraulic telescopic boom marine crane is a full-hydraulic deck crane for port work boats, offshore platforms, tankers and cargo vessels. Specifications: standard 1–10 t, custom 15–30 t, 5–30 m radius, 5–30 m hoisting height, 360° slewing. A 360° slewing column, a single luffing cylinder, a multi-section box boom and a hydraulic winch sit on one cylindrical base. The hook can reach far across the water, yet the stowed crane takes little deck space.
  • SWL: 1–10 ton, Customized up to 30 Ton
  • Working Radius: 5–30 Meters
  • Hoisting Height: 5–30 Meters
  • Slewing Range: 360° Slewing
ضمان الجودة
آمن ومستقر
أداء قوي
خدمة ما بعد البيع ممتازة

What Is Hydraulic Telescopic Boom Marine Crane?

Haitai hydraulic telescopic boom marine crane is a full-hydraulic deck crane for port work boats, offshore platforms, tankers and cargo vessels. A 360° slewing column, a single luffing cylinder, a multi-section box boom and a hydraulic winch sit on one cylindrical base. The hook can reach far across the water, yet the stowed crane takes little deck space. Standard models cover 1 t to 10 t, and 15 t to 30 t cranes are custom-engineered to your vessel.

Capacity (SWL)Working RadiusHoisting Heightالدوران
1 – 10 t standard; 15 – 30 t custom5 – 30 متر5 – 30 متر360 درجة متواصلة
  • Standard Range: Proven standard configurations from 1 t to 10 t (10–100 kN) cover general deck handling, port work boats and offshore support lifting.
  • Heavy-Duty & Large-Scale: From 15 t to 30 t (150–300 kN), every crane is custom-engineered to the vessel’s deck arrangement, class requirements and duty cycle.

احصل على عرض سعر

Why Choose a Telescopic Boom Marine Crane?

A stiff boom marine crane changes its reach by luffing alone. A telescopic boom marine crane adds a second way to set the radius: hydraulic cylinders push nested inner sections out of the main boom. The same crane can therefore lift close to the hull, then reach across a wide gap to the quay or to a neighbouring vessel.

When work is finished, the inner sections retract fully into the main boom. The luffing cylinder then lowers the boom onto a rest on deck, so the crane rides out the voyage with a short, rigid profile. That removes the shock load caused by ship motion and frees working space on the deck. Owners with limited deck length or with long-reach duties tend to choose this type.

grey Haitai hydraulic telescopic boom marine crane in the factory yard showing the cylindrical base, slewing bearing and luffing cylinder
Rear view of a grey Haitai hydraulic telescopic boom marine crane in the factory yard showing the cylindrical base, slewing bearing and luffing cylinder
Grey Haitai hydraulic telescopic boom marine crane with the boom luffed up and extended in the factory yard, beside a steel test frame

Core Structure and Performance

Cylindrical Base and 360° Slewing

The crane stands on a welded cylindrical base, either a plain high column or a flanged type with radial ribs. It passes the working load, from 10 kN up to 300 kN, evenly into the hull structure. The slewing bearing is held by a full ring of high-strength bolts and turns continuously through 360°.

Slewing speed is matched to crane size: 1 r/min at 1–2 t, 0.9 r/min at 3 t, 0.75 r/min at 5–10 t, 0.6 r/min at 15–20 t, 0.5 r/min at 25 t and 0.4 r/min at 30 t. Long-reach loads are therefore positioned smoothly.

Multi-Section Box Boom

The main boom and every inner section are closed, welded box sections with high bending and torsional stiffness. On standard 1–10 t cranes the minimum radius is 1.4–5.3 m and the maximum radius is 5–20 m (5–18 m on 1–3 t models, 12–20 m on 5–10 t models). Custom 15–30 t cranes reach up to 30 m, with a minimum radius of 3.3–7.9 m.

To protect the hydraulic lines on a long-stroke boom, a flexible cable chain can run along the side of the main boom. Alternatively, the extension cylinder can be mounted outside on top of the boom, which makes inspection and sea-going maintenance easier.

hydraulic telescopic boom marine crane

Luffing, Hoisting and Power

  • Single luffing cylinder. A large-bore cylinder between the column lugs and the boom base raises and lowers the boom. Luffing time is 60 s at 1–2 t, 70–110 s at 3–15 t and 120–140 s at 20–30 t.
  • Hydraulic winch. The winch can sit above the boom root or beneath the boom. Hoisting speed is 15 m/min on every model, and hoisting height is 5–30 m, set to deck height and quay level.
  • Power unit. Standard 1–10 t cranes use a single-motor hydraulic power unit of 7.5–75 kW. A custom 15 t crane uses 90 kW. Custom 20–30 t cranes use twin motors: 2 × 75 kW at 20 t and 2 × 90 kW at 25–30 t.

Controls and Deck Safety

For all-weather and high-frequency work, a closed cab can be fitted beside the column, with panoramic glass, wiper, ergonomic seat, two control levers and a roof-mounted air-conditioning unit. For crowded decks, a cab-free column design places the electrical control box at the base. A vertical ladder, handrails and a purpose-built boom rest keep both sailing and inspection work safe.

hydraulic telescopic boom marine crane
hydraulic telescopic boom marine crane

Marine Telescopic Crane Technical Specifications

SWL (t)Rated load (kN)Max. radius (m)Min. radius (m)Hoisting height (m)Slewing (r/min)Luffing time (s)Motor power (kW)
1106 – 121.6 – 3.35 – 301607.5
1.5158 – 142.2 – 3.75 – 3016011
2205 – 151.4 – 4.05 – 3016015
3308 – 182.2 – 4.85 – 300.97022
55012 – 203.3 – 5.35 – 300.758037
88012 – 203.3 – 5.35 – 300.7510055
1010012 – 203.3 – 5.35 – 300.7511075
15 (custom)15012 – 203.3 – 5.35 – 200.611090
20 (custom)20015 – 254.0 – 5.65 – 200.61202 × 75
25 (custom)25015 – 304.0 – 7.95 – 200.51302 × 90
30 (custom)30015 – 304.0 – 7.95 – 200.41402 × 90

Please Note: Standard configurations up to 10 tons are built to our proven designs for faster production and delivery. Cranes of 15 tons and above (shaded rows) are custom-engineered to your vessel parameters, classification society requirements and deck stability needs. All ship telescopic boom crane models have a hoisting speed of 15 m/min and 360° continuous slewing. Hoisting height is 5–30 m, set to the project. Rated load in kN is the SWL in tonnes multiplied by 10. Data are for reference only.

احصل على عرض سعر

Three Typical Deck Configurations

The same marine crane principle is built in several layouts. These three cover most vessel types.

1. Heavy-Duty Multi-Section Boom with Top-Mounted Winch

Suited to 8–10 t standard cranes and to custom 15–30 t cranes for heavy ship-to-quay loads. The boom has a yellow main section and two black inner sections, with a cable chain along its side. The winch drum sits above the boom root, and the rope runs along the top of the boom to the head. A multi-fall block hangs from the boom head, and the boom reaches over the ship’s side to lift a test load on the quay. A side-mounted cab gives a clear view of both the vessel side and the quay.

2. Cab-Controlled Configuration with Underslung Winch

Suited to 5–10 t standard cranes (15 t on request) on multi-purpose work boats, offshore platforms and inland waterway vessels. The closed cab has a roof-mounted air-conditioning unit and suits hot, humid or cold waters. The winch hangs under the boom, and when idle the boom rests on a column fitted with climbing steps and ribs.

3. Compact Cab-Free Configuration for Crowded Decks

Suited to 1–10 t standard marine cranes on decks full of pipework, such as tankers and construction vessels. Dropping the cab shortens the tail swing and reduces deck footprint. The crane is controlled from the base, and the boom is retracted and rested on a support column at the deck front, clear of nearby equipment and workers.

Deck Telescopic Crane Configuration Comparison

غرضHeavy-duty multi-sectionCab with underslung winchCompact cab-free
Typical capacity8–10 t standard; 15–30 t custom5–10 t standard; 15 t custom1–10 t standard
BoomThree sections, cable chain on the boom sideTelescopic box boomSlim telescopic box boom
Winch and hookTop-mounted winch, multi-fall blockUnderslung winch, single hookCompact winch, standard marine hook
Operator stationSide-mounted cab with wiperSide-mounted cab with air conditioningNo cab, control at the base
Boom restFully extended over the side for quay lifts; rest on deck when idleColumn with climbing steps and ribsSupport column at the deck front

احصل على عرض سعر

Radius Beyond the Standard Table

The standard table is a reference, and radius can be extended on request. The two marine cranes below are marked SWL 5 t at 30 m, longer than the 12–20 m maximum radius listed for a standard 5 t unit. Tell us the load and radius you need, and we will set the boom length and load chart to match.

Orange Haitai hydraulic telescopic boom marine crane marked SWL 5 t 30 m with an operator cab on a vessel deck
A cab-equipped crane marked SWL 5 t at 30 m.
Yellow Haitai hydraulic telescopic boom marine crane marked SWL 5 t 25 m working beside an offshore platform structure with scaffolding on the deck
A crane marked SWL 5 t at 25 m beside an offshore platform structure.

Installation, Operation and Maintenance Points

  • Base and slewing bearing. Check the welded base or flange ribs regularly, and re-check the torque of the full ring of bolts on the bearing flange.
  • Sailing position. Before the vessel sails, retract the boom fully and lower it onto the deck boom rest. Then release the static pressure in the hydraulic system.
  • Hydraulic system. Inspect the hoses in the column, the cable chain or the external extension cylinder seals, and confirm oil level and temperature at the power unit.
  • Rope and hook. Inspect rope spooling on the winch drum, wear on the boom-head sheaves, and the hook latch or the block connections.

Request a General Arrangement Drawing

Fill in what you know and send it back. Partial answers are enough for our engineers to start a GA drawing, load chart and foundation reaction table.

#Item to confirmYour requirement
1SWL and the radius it must be lifted at 
2Minimum and maximum working radius 
3Hoisting height required (5–30 m range) 
4Vessel type, size and crane position on deck 
5Pedestal height and deck thickness at the foundation 
6Winch position (top-mounted or underslung) 
7Cab or cab-free control, and climate (air conditioning needs) 
8Power source (ship supply voltage / frequency) 
9Boom rest position and free deck length 
10Class society, coating colour and delivery date 

Need a Standard Telescopic Crane or a Heavy-Duty Custom Build? Whether you need a standard marine crane up to 10 tons or a custom-engineered 15–30 ton crane, Haitai’s engineering team will prepare the proposal and drawing for your vessel.

👉 [Request a Custom GA Drawing & Quote Today]

Leon
10+ سنوات الخبرة.
5,000+ عملاء
50+ بلدان

سيمون

أخصائي حلول الرافعات · رافعة عالية الضغط

متخصصون في حلول تصدير الرافعات الجسرية، ورافعات الموانئ، ورافعات الحاويات، ورافعات القوارب البحرية، والرافعات العلوية. خبرة تزيد عن عشر سنوات في مساعدة العملاء العالميين من خلال الاستشارات قبل البيع، واختيار السعة، والتكوينات الخاصة بكل موقع.

التكريمات والشهادات

خدمة

الاستشارة الفنية قبل البيع
يقوم فريقنا الهندسي بمراجعة تصميم ساحة التخزين، ومتطلبات الإنتاجية، والبنية التحتية قبل التوصية بالتصميم الأمثل. نقدم عروضًا فنية، ورسومات تخطيطية، وحسابات للأحمال - مجانًا - قبل إتمام عملية الشراء.
اختبار القبول في المصنع (FAT)
تخضع جميع الرافعات لاختبار التحميل الكامل في مصنعنا قبل الشحن. نرحب بالمشترين لمشاهدة اختبار التحميل الكامل شخصيًا أو عبر البث المباشر. تُصدر تقارير وشهادات الاختبار عند الانتهاء.
التركيب والتشغيل
يتولى فريق الخدمة الميدانية لدينا تركيب الرافعات بالكامل، وتشغيل الأنظمة الكهربائية، ودمج الأنظمة في منشأتك. يشمل التشغيل تدريب المشغلين وتوثيق عملية التسليم.
توريد قطع الغيار
نحتفظ بمخزون عالمي من قطع الغيار لجميع طرازات الرافعات التي نوفرها. تتوفر المكونات الأساسية - مثل الموزعات، ومحركات الرفع، ومحركات التردد المتغير، ووحدات التحكم المنطقية القابلة للبرمجة - للشحن خلال 48-72 ساعة. كما تتوفر اتفاقيات توريد طويلة الأجل لمشغلي أساطيل الرافعات.
برامج الصيانة الوقائية
نقدم عقود صيانة سنوية تشمل عمليات الفحص والتشحيم واستبدال قطع الغيار المستهلكة وعمليات التدقيق في السلامة. كما تتيح لنا منصة مراقبة الرافعات التشخيص عن بُعد تحديد الأعطال مبكراً قبل أن تتسبب في توقف غير مخطط له.
ضمان
الضمان القياسي: ٢٤ شهرًا من تاريخ التشغيل، ويشمل المكونات الهيكلية والميكانيكية والكهربائية في ظل ظروف التشغيل العادية. تتوفر عقود ضمان وخدمة ممتدة.

لماذا تختارنا؟

قوة هائلة
منتجاتنا تُباع مباشرة من المصنع بجودة مضمونة. وهي تلقى رواجاً كبيراً في جميع أنحاء البلاد، وقد حظيت بتقييمات إيجابية من العملاء مراراً وتكراراً!
ذوي الخبرة
منتجاتنا تُباع مباشرة من المصنع بجودة مضمونة. وهي تلقى رواجاً كبيراً في جميع أنحاء البلاد، وقد حظيت بتقييمات إيجابية من العملاء مراراً وتكراراً!
ضمان الجودة
منتجاتنا تُباع مباشرة من المصنع بجودة مضمونة. وهي تلقى رواجاً كبيراً في جميع أنحاء البلاد، وقد حظيت بتقييمات إيجابية من العملاء مراراً وتكراراً!
خدمة خالية من القلق
منتجاتنا تُباع مباشرة من المصنع بجودة مضمونة. وهي تلقى رواجاً كبيراً في جميع أنحاء البلاد، وقد حظيت بتقييمات إيجابية من العملاء مراراً وتكراراً!

الأسئلة الشائعة

لأي استفسارات لم تتم الإجابة عليها، تواصل مع فريق الدعم لدينا عبر البريد الإلكتروني. سنرد عليك في أقرب وقت ممكن لمساعدتك.
Q1: What are the standard capacities, and how large can the crane be?
Standard models are 1, 1.5, 2, 3, 5, 8 and 10 tons (10–100 kN), which suit most port work boats, cargo ships and offshore support vessels. For larger duties, we custom-engineer 15, 20, 25 and 30 ton cranes (150–300 kN).
Q2: What radius, hoisting height and speeds can I expect?
On standard 1–10 t cranes the maximum radius is 5–20 m and the minimum radius 1.4–5.3 m. Custom 15–30 t cranes reach up to 30 m. Hoisting height is 5–30 m on all models. Hoisting speed is 15 m/min, slewing speed 0.4–1 r/min and luffing time 60–140 s, and slewing is 360° continuous.
Q3: How is the power unit configured?
Standard 1–10 t cranes use a single hydraulic motor of 7.5, 11, 15, 22, 37, 55 or 75 kW as size rises. A custom 15 t crane uses 90 kW. Custom 20 t, 25 t and 30 t cranes use twin motors, 2 × 75 kW and 2 × 90 kW, for more power reserve during combined movements.
Q4: Can I choose a cab or a cab-free crane to suit my deck?
Yes. A closed cab with wide windows, a wiper, a seat, control levers and an air-conditioning unit suits long shifts and extreme climates. On a crowded deck, a cab-free column with an electrical control box at the base reduces the tail swing.
Q5: Can radius, hoisting height or winch position be customized?
Yes. The table is a reference only. We can adjust SWL, minimum and maximum radius, hoisting height (5–30 m), winch position and paint colour to your deck space, load curve and vessel side clearance. Radius beyond the table, such as 5 t at 25 m, is also possible.

رسالة

لا تتردد في الاتصال بنا

نموذج الاتصال
يرجى تحديد متطلباتك بالرجوع إلى الجوانب التالية:
  • ما هو منتج الرافعة الذي تحتاجه؟
  • ما هي أقصى قدرة رفع (بالأطنان) المطلوبة لمشروعك؟
  • هل يمكنك تحديد ارتفاع الرفع المطلوب (بالمتر)؟
  • هل يمكنك تقديم تفاصيل عن بيئة العمل، مثل حالة الأرض، ومحدودية المساحة، وأي عوائق؟
  • ما هو معدل الاستخدام المتوقع ومدة المشروع؟

المنتجات ذات الصلة

Two Haitai hydraulic stiff boom marine cranes, one white and one red, working on a tanker deck at a terminal
Hydraulic Stiff Boom Marine Crane

What Is Hydraulic Stiff Boom Marine Crane? Haitai hydraulic stiff boom marine crane is a pedestal-mounted deck crane built around one rigid boom. Hydraulic cylinders luff it, a slewing drive turns it through a full circle, and a hydraulic winch does the lifting. With no telescopic sections or knuckle joint, the load chart stays easy to read and upkeep stays low. Standard models cover 0.5 t to 20 t, and heavy-duty cranes up to 50 t are custom-engineered to your deck drawing. Capacity (SWL) Max Outreach Hoist Height Slewing Power 0.5 – 20 t standard, up to 50 t custom Up to 40 m 5-30 m 360° continuous Electro-hydraulic or diesel-hydraulic Stiff boom marine crane or fixed boom marine crane is one crane, two names. Buyers search for this crane under both names, and they mean the same thing. “Stiff” and “fixed” describe the boom length only. The boom cannot extend or fold, but the crane itself is far from static: it luffs up and down, slews around its pedestal, and hoists at every radius on its load chart. Outreach…

اقرأ المزيد
Marine Arm Crane-5
رافعة ذراع بحرية – رافعات مفصلية ورافعات ذات ذراع مفصلية للسفن التجارية

تُعدّ رافعة الذراع البحرية من أكثر معدات سطح السفينة تنوعًا. على عكس رافعة سطح السفينة ذات الذراع المستقيمة، تتميز رافعة الذراع المفصلية أو الرافعة ذات الذراع القابلة للطيّ بسهولة عند عدم استخدامها، وقدرتها على الوصول إلى ما وراء العوائق، ووضع الأحمال بدقة لا تُضاهى بالرافعة ذات الذراع الثابتة. بالنسبة لمالكي السفن وفرق المشتريات الذين يُقيّمون خيارات رافعات سطح السفينة، غالبًا ما ينحصر الاختيار بين الرافعة ذات الذراع المستقيمة والرافعة ذات الذراع المفصلية في سؤال واحد: هل تتطلب عملياتكم استخدام الرافعة في أماكن ضيقة، أو الوصول إلى ما دون مستوى سطح السفينة، أو التعامل مع أوضاع أحمال غير منتظمة؟ إذا كانت الإجابة بنعم، فإن رافعة الذراع البحرية هي الخيار الأمثل بلا شك. تتناول هذه الصفحة ماهية رافعات الذراع البحرية، وأماكن استخدامها، ومعنى المواصفات الرئيسية، وكيفية تقييم الموردين قبل اتخاذ قرار الشراء. ما هي رافعة الذراع البحرية؟ المفهوم الأساسي للتصميم: تستخدم رافعة الذراع البحرية - والتي تُسمى أيضًا رافعة الذراع المفصلية أو الرافعة البحرية المفصلية - قسمين أو أكثر من الذراع متصلة بمفاصل مفصلية تعمل بالطاقة الهيدروليكية. يسمح هذا المفصل للرافعة بـ...

اقرأ المزيد
Ship Deck Crane
رافعة سطح السفينة – رافعات شحن بحرية للسفن التجارية والبحرية

يُسبب اختيار رافعة سطح السفينة الخاطئة مشاكل تُلازم السفينة طوال فترة تشغيلها. فقدرة الرفع غير الكافية، أو ضعف مدى الوصول، أو عدم اعتماد الرافعة من قِبل هيئة التصنيف، كلها عوامل قد تُؤخر إجراءات التخليص الجمركي في الميناء، وتزيد من تكاليف التشغيل، أو تُعرّض الشركة للمسؤولية القانونية في حال وقوع حادث. تُقدم هذه الصفحة لمديري المشتريات، ومالكي السفن، وفرق الشراء في أحواض بناء السفن، نظرة عامة واضحة وعملية حول ما يجب البحث عنه عند اختيار رافعة سطح السفينة. نُغطي أنواع المعدات، والمعايير الفنية الرئيسية، ومتطلبات الاعتماد، وما يُميز المورد الموثوق عن المورد غير الموثوق. تُصنّع شركة HT Crane وتُصدّر رافعات سطح السفينة بمختلف القدرات، وندعم كل وحدة بشهادة من هيئة التصنيف، واختبارات التحميل في المصنع، ودعم قطع الغيار على المدى الطويل. ما هي رافعة سطح السفينة؟ الوظيفة الأساسية: رافعة سطح السفينة هي جهاز رفع دوار مُثبّت بشكل دائم على سطح السفينة. تُستخدم لتحميل وتفريغ البضائع في الموانئ التي لا تتوفر فيها معدات ساحلية أو تكون غير كافية. كما تُستخدم أيضًا في عمليات سطح السفينة، ونقل المعدات، وعمليات الصيانة أثناء الرحلة.

اقرأ المزيد
قمة